Influence of Décor and Overlay Paper Mass on Laminate Floor Product Properties. С. 172-182

Complete text of the article:

Download article (pdf, 1.3MB )

UDС

630*23(470.45)

DOI:

10.37482/0536-1036-2025-2-172-182

Abstract

Laminate flooring products are among the essential construction and building materials not only because of their aesthetics, but also their ability to provide energy saving, sound insulation, prevent surface scratches, and minimize maintenance such as periodic varnishing in the case of solid wood flooring, etc. Even though the laminate flooring products are scratch-resistant and easy to install, they must meet the standard requirements. Therefore, optimizing the production parameters of laminate flooring products is of interest in research and development to obtain cost-effective products that not only compete in the market but also represent scientific communities’ studies. In this sense, production parameters such as paper properties, core material type and properties, resin utilization, pressing conditions (pressure, duration, and temperature), etc. come to the forefront. From this point of view, the effect of décor (105, 115, and 125 g/m²) and overlay (90 and 95 g/m²) paper mass on the surface abrasion (SA), abrasion resistance (AR), impact resistance (IR) and cure properties of laminate floor products which have been industrially produced has been figured out. According to the results, SA, AR, IR, and cure values ranged from 3,600–4,800 revolutions, 4.5–5.0, 110–130 N, and class 5, respectively. According to BS-EN 13329 and BS-EN 14323, products meet the requirements. However, the effect of paper masses on properties has been found to be unstable due to oscillations and no changes observed. In the literature, there are scarcely any studies that figure out these parameters and the authors think that the results of this study may provide valuable data for the comparison.

Authors

Murat Aydin¹* , Doctor of Science, Assoc. Prof.; ResearcherID: ADK-7476-2022, ORCID: https://orcid.org/0000-0002-3015-1868
Mehmet Erdal Kara², Doctor of Science; ORCID: https://orcid.org/0000-0003-1741-8211
Osman Çamlıbel³, Doctor of Science, Assoc. Prof.; ResearcherID: S-3506-2017, ORCID: https://orcid.org/0000-0002-8766-1316

Affiliation

³Kırıkkale University, Ankara Yolu, 7 km, Yahşihan / Kırıkkale, 71450, Türkiye; osmancamlibel@kku.edu.tr

Keywords

laminate floor, overlay paper, décor paper, high-density fiberboard

For citation

Aydın M., Kara M.E., Çamlıbel O. Influence of Décor and Overlay Paper Mass on Laminate Floor Product Properties. Lesnoy Zhurnal = Russian Forestry Journal, 2025, no. 2, pp. 172–182. https://doi.org/10.37482/0536-1036-2025-2-172-182

References

1. Arenas J.P., Sepulveda L.F. Impact Sound Insulation of a Lightweight Laminate Floor Resting on a Thin Underlayment Material Above a Concrete Slab. Journal of Building Engineering, 2022, vol. 45, art. no. 103537. https://doi.org/10.1016/j.jobe.2021.103537
2. Bardak S., Sarı B., Nemli G., Kırcı H., Baharoğlu, M. The Effect of Decor Paper Properties and Adhesive Type on Some Properties of Particleboard. International Journal of Adhesion and Adhesives, 2011, vol. 31, iss. 6, pp. 412–415. https://doi.org/10.1016/j.ijadhadh.2011.02.008
3. Borrell J.M.G., Alcaraz J.G.S., Sanchis E.J. Experimental and Numerical Acoustic Characterization of Laminated Floors. Experimental Techniques, 2016, vol. 40, pp. 857–863. https://doi.org/10.1007/s40799-016-0086-9
4. BS-EN 13329:2023. Laminate Floor Coverings. Specifications, Requirements and Test Methods. London, BSI, 2023. 24 p.
5. BS-EN 14323:2021. Wood-Based Panels. Melamine Faced Boards for Interior Uses. Test Methods. London, BSI, 2021. 26 p.
6. Çamlıbel O., Aydın M. The Effects of Continuous Press Speed and Conditioning Time on the Particleboard Properties at Industrial Scale. BioResources, 2022, vol. 17, iss. 1, pp. 159–176. https://doi.org/10.15376/biores.17.1.159-176
7. Istek A., Aydemir D., Aksu S. The Effect of Décor Paper and Resin Type on the Physical, Mechanical, and Surface Quality Properties of Particleboards Coated with Impregnated Décor Papers. BioResources, 2010, vol. 5, iss. 2, pp. 1074–1083. https://doi.org/10.15376/biores.5.2.1074-1083
8. İstek A., Özlüsoylu İ., Özel F., Yazıcı H. Problems in Laminate Parquet Applications. Proceedings of the III International Mediterranean Forest and Environment Symposium. Kahramanmaraş Sütçü İmam University, 2019, pp. 633–636.
9. Jiménez P., Dunkl A., Eibel K., Denk E., Grote V., Kelz C., Moser M. Evaluating Psychological Aspects of Wood and Laminate Products in Indoor Settings with Pictures. Forest Products Journal, 2015, vol. 65, iss. 5–6, pp. 263–271. https://doi.org/10.13073/FPJ-D-14-00003
10. Jiménez P., Dunkl A., Eibel K., Denk E., Grote V., Kelz C., Moser M. Wood or Laminate?—Psychological Research of Customer Expectations. Forests, 2016, vol. 7, no. 11, art. no. 275. https://doi.org/10.3390/f7110275
11. Kalaycioglu H., Hiziroglu S. Evaluation of Surface Characteristics of Laminated Flooring. Building and Environment, 2006, vol. 41, iss. 6, pp. 756–762. https://doi.org/10.1016/j.buildenv.2005.03.012
12. Kara M.E., Ayrilmis N., Uncu A. Effect of Overlay Paper Properties on the Surface Quality of Laminate Flooring. Machines. Technologies. Materials, 2022, vol. 16, iss. 6, pp. 199–201.
13. Kara M.E., Yerlikaya Z., Ateş S., Olgun, Ç. Effect of Pressing Conditions on Some Surface Properties of HDF Laminate Parquets. Indian Journal of Engineering & Materials Sciences, 2016, vol. 23, pp. 274–278.
14. Nandipati M.R., Suman K.N.S. Improving Abrasion Resistance of Laminate Floor with Additional Curing Prior to Final Coating – An Experiment and SAS Program. International Journal of Innovative Science and Research Technology, 2021, vol. 6, iss. 12, pp. 780–784.
15. Nemli G. Factors Affecting Some Quality Properties of the Decorative Surface Overlays. Journal of Materials Processing Technology, 2008, vol. 195, iss. 1–3, pp. 218–223. https://doi.org/10.1016/j.jmatprotec.2007.05.001
16. Nemli G., Yıldız S., Gezer E.D. Effects of Melamine Raw Paper Weight, Varnish Type and the Structure of Continuous Pressed Laminate (CPL) on the Physical, Mechanical Properties and Decay Resistance of Particleboard. International Biodeterioration & Biodegradation, 2005, vol. 56, iss. 3, pp. 166–172. https://doi.org/10.1016/j.ibiod.2005.07.002
17. Roos A., Hugosson M. Consumer Preferences for Wooden and Laminate Flooring. Wood Material Science and Engineering, 2008, vol. 3, iss. 1–2, pp. 29–37. https://doi.org/10.1080/17480270802573586
18. Schütte S., Lindberg A., Eklund J. Subjective Assessment of Laminate Flooring. Contemporary Ergonomics. London, Taylor & Francis, 2006, pp. 194–198. https://doi.org/10.1201/9781003072072-45
19. Seo J., Jeong S.-G., Kim S., Huh W. Improvement of Thermal Conductivity of Underlay Foam for Laminate Flooring to Reduce Heating Energy. BioResources, 2016, vol. 11, iss. 4, pp. 9059–9067. https://doi.org/10.15376/biores.11.4.9059-9067
20. Sıradağ H. Free Formaldehyde Change in Laminate Parquet Depending on the Waiting Time: Master’s Thesis. Turkey, Bartın, Bartın University, 2019. 273 p. (In Turk.).
21. Wilson J., Cunefare K. Sound Quality of Laminate Flooring Systems. The Journal of the Acoustical Society of America, 2008, vol. 24, iss. 4_Supplement, art. no. 2441. https://doi.org/10.1121/1.4782562
22. Yetiş C., Tuna Kayili M. Determination of the Effect of Laminate Flooring on Indoor Air Quality during the Installation Phase of the Building. Journal of International Environmental Application and Science, 2021, vol. 16, iss. 4, pp. 140–148.