Analysis of Wind Load Effect on Greenhouse Frame for Cultivation Seedlings with Closed Root System. P. 195–201

Complete text of the article:

Download article (pdf, 1.1MB )

UDС

631.544.43;004.896

DOI:

10.37482/0536-1036-2023-2-195-201

Abstract

Reforestation is one of the priorities of the state policy of the Russian Federation. Artificial recreation of forests, including a closed root system seedling cultivation technology, has shown its high efficiency in the conditions where natural recovery didn’t develop at the proper extent, especially in the areas affected by large-scale clearcuts and crown fires. Despite the high cost of the closed root system seedling cultivation technology, it is economically viable due to the high survival rate of the plants and the possibility to carry out the planting process over a long period of time. The industrial greenhouses are used for this technology and their construction engineering must consider the influence of external stress, including wind load that depends on the territorial location of the structure. The purpose of the study is to justify the construction characteristics of a greenhouse frame with a sufficient strength for the cultivation of seedlings with the closed root system. The object of the study is a rigid frame model of the greenhouse. The study was performed in the climate conditions of the Krasnoyarsk Krai. The stress and strain analyss are made on the greenhouse construction elements under the conditions of their own weight and wind load using the method for solid modelling. The principal and the peak loads, the dimensions of the most stained areas, the influence of the wind load in these regions are calculated by applying the finite element algorithm for stress analysis simulated in a CAD software. The recommendations for the optimization of the structure are given.

Authors

Denis V. Chernik*, Candidate of Engineering, Assoc. Prof.; ResearherID: ACY-8919-2022, ORCID: https://orcid.org/0000-0002-8114-764X
Elena V. Avdeeva, Doctor of Agriculture, Assoc. Prof.; ResearherID: GLR-2803-2022, ORCID: https://orcid.org/0000-0003-3425-7157
Kristina N. Chernik, Junior Research Scientist; ResearherID: ETZ-9702-2022, ORCID: https://orcid.org/0000-0003-1203-4825
Nikita L. Rovnykh, Junior Research Scientist; ResearherID: GLR-2881-2022, ORCID: https://orcid.org/0000-0001-6514-3393

Affiliation

Reshetnev Siberian State University of Science and Technology, prosp. named after gazeta Krasnoyarskiy Rabochiy, 31, Krasnoyarsk, 660037, Russian Federation; dionisu2@mail.ru*, e.v.avdeeva@gmail.com, Kristi.blueberry@yandex.ru, chacha.92@bk.ru

Keywords

reforestation, greenhouse, closed roof system, seedlings with closed root system, solid modeling, stress and strain analysis, CAD software, Krasnoyarsk Krai

For citation

Chernik D.V., Avdeeva E.V., Chernik K.N., Rovnykh N.L. Analysis of Wind Load Effect on Greenhouse Frame for Cultivation Seedlings with Closed Root System. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 2, pp. 195–201. (In Russ.). https://doi.org/10.37482/0536-1036-2023-2-195-201

References

1. Avdeyeva E.V., Rovnykh N.L., Ivanov D.V., Sukhenko N.V., Kukhar I.V., Kalinin M.D. Russian and World Experience in Growing Planting Material with a Closed Root System. Khvoynye boreal’noy zony = Conifers of the Boreal Area, 2022, vol. 40, no. 4, pp. 250–258. (In Russ.).

2. Alyamovskiy A.A. SOLIDWORKS Simulation and FloEFD. Practice, Methodology, Ideology. Moscow, DMK Press Publ., 2020. 658 p. (In Russ.).

3. Ananyev E.M., Azbayev B.O., Suyundikov Zh.O., Rakhimzhanov A.N., Razhanov M.R. The Use of Planting Material with Closed Root System in the Steppe Zone. Aktual’nye problemy lesnogo kompleksa, 2016, no. 46, pp. 60–63. (In Russ.).

4. Bobushkina S.V., Mochalov B.A., Shaposhnikova L.V. Experience of Growing Planting Material with Closed Root System in Arkhangelsk Region. Forests and Forestry in Current Conditions: Proceedings of the All-Russian International Conference, Khabarovsk, 4-6 October 2011. Ed. by A.P. Kovalev. Khabarovsk, Dal’NIILKh Publ., 2011, pp. 81–84. (In Russ.).

5. Bondarenko A.S., Zhigunov A.V. Statistical Processing of Forestry Research Materials. Sankt Petersburg, POLYTECH Publ., 2016. 125 p. (In Russ.).

6. Chyong Vu Van. Silvicultural and Ecological Consequences of Complex Logging in Drained Pine Forests (a Case Study in the Leningrad Region): Cand. Agric. Sci. Diss. Abs. Saint Petersburg, 2018. 110 p. (In Russ.).

7. Gof A.A. Efficiency of Scots Pine Forest Cultivation by Seedlings with Closed Root System in Ribbon Forests of Altai: Cand. Agric. Sci. Diss. Abs. Ekaterinburg, 2020. 169 p. (In Russ.).

8. Dolgushin V.A., Solyanik S.S., Spirina A.V. Mechanics: Resistance of Materials. Evaluation of Constructional Components by Strength, Rigidity and Stability. Saint Petersburg, SPbGAU Publ., 2019. 47 p. (In Russ.).

9. Korchagov S.A., Gribov S.E., Obryadina O.Yu. Economic Appraisal of Forest Plantation Development by Kinds of Planting Material. Lesnoy Zhurnal = Russian Forestry Journal, 2017, no. 5, pp. 92–102. (In Russ.). https://doi.org/10.17238/issn0536-1036.2017.5.92

10. Kuznetsov F.A., Sladkova L.A., Krylov V.V. Wind Load Modeling by SOLIDWORKS Software. Stroitel’nye i dorozhnye mashiny = Construction and Road Building Machinery, 2020, no. 12, pp. 23–27. (In Russ.).

11. Luginina L.I., Ivashchenko N.N. Application of Scots pine (Pinus sylvestris L.) Cultivated with Container Technology on Logging Areas of Nizhny Novgorod Region. Vestnik of Nizhny Novgorod State Agricultural Academy, 2017, no. 1(13), pp. 25–31. (In Russ.).

12. Rodin A.R., Vasilyev S.B., Rodin S.A., Savchenkova V.A., Nikitin V.F., Kalashnikova E.A. Theory and Practice of Artificial Reforestation. Moscow, MGTU im. N.E. Baumana Publ., 2019. 164 p. (In Russ.).

13. Chernik D.V., Avdeyeva E.V., Logachev A.K., Chernik K.N., Rovnykh N.L. Study of the Effect of Snow Load on the Framework of Greenhouses for Growing Seedlings with Root-Balled Tree System in SolidWorks. Khvoynye boreal’noy zony = Conifers of the Boreal Area, 2022, vol. 40, no. 4, pp. 333–337. (In Russ.).

14. Chernik K.N., Chernik D.V. Strength Characteristics Analysis of Combined Crane Arm in SolidWorks Software. Mechanical Engineering: New Concepts and Technologies. Proceedings of the All-Russian Scientific and Practical Conference of Students, Post-Graduates and Young Scientists. Krasnoyarsk, October 23, 2020. Krasnoyarsk, SibGU im. M.F. Reshetnev Publ., 2020, pp. 200–203. (In Russ.).

15. Clabo D.C., Clatterbuck W.K. Establishment and Early Development of Even-Age Shortleaf Pine-Hardwood Mixtures Using Artificially Regenerated Shortleaf Pine and Various Site Preparation and Release Treatments. Forest Science, 2020, vol. 66, no. 3, pp. 351–360. https://doi.org/10.1093/forsci/fxz082

16. Dey D.C., Jacobs D., McNabb K., Miller G., Baldwin V., Foster G. Artificial Regeneration of Major Oak (Quercus) Species in the Eastern United States: A Review of the Literature. Forest Science, 2008, vol. 54, no. 1, pp. 77–106. https://doi.org/10.1093/forestscience/54.1.77

17. Yang A.-S., Juan Y.-H., Wen C.-Y., Su Y.-M., Wu Y.-C. Investigation on Wind Environments of Surrounding Open Spaces Around a Public Building. Journal of Mechanics, 2017, vol. 33, no. 1, pp. 101–113. https://doi.org/10.1017/jmech.2016.47

18. Ogilvy T.K., Legg C.J., Humphrey J.W. Diversifying Native Pinewoods Using Artificial Regeneration. Forestry, England, London, vol. 79, no. 3, рр. 309–317. https://doi.org/10.1093/forestry/cpl018

19. Zhang J., Webster J., Powers R.F., Mills J. Reforestation After the Fountain Fire in Northern California: An Untold Success Story. Journal of Forestry, 2008, vol. 106, iss. 8, pp. 425–430, https://doi.org/10.1093/jof/106.8.425

20. Zhang Y., Fu Y., Jia J., Luo X. An Approach to Automatic Boundary Segmentation of Solid Models Using Virtual Topology: Toward Reconstruction of Design Features. Journal of Computational Design and Engineering, 2020, vol. 7, no. 3, pp. 367–385. https://doi.org/10.1093/jcde/qwaa030