Reduction of Paper Pulp Fluctuations in Tissue Paper Making Machine. P. 186–200

Complete text of the article:

Download article (pdf, 0.7MB )

UDС

676.056.5

DOI:

10.37482/0536-1036-2023-1-186-200

Abstract

The subject of the research is a paper for sanitary-hygienic purposes. The objects of the study are a pulper infeed system and a round grid perforated forming device. The purposes of the work are to identify sources and reduce fluctuations of 1 m2 of pulp for sanitaryhygienic paper, which decrease the structural irregularities of the paper web in longitudinal and transverse directions. The methodology of the study is to investigate the flow pulsation of the pulp, the fluctuations of the pulp web at the Yankee cylinder (without crepe), to verify the tensile strength of the paper web in longitudinal and transverse directions for identification of a correlation between the pulsation, the vibration of the pulp and the strength of the paper web. The trials were made during the production of sanitary-hygienic paper with the mass 17–18 g/m2 at a steady working speed of the machine 5 m/s. Pulsations of paper pulp in the low-frequency spectrum of 0.14–1.35 Hz prevail in the mass-intake device. The rectangular paper samples 432×230 mm² were created for examination of structural irregularities of the paper web. The length 432 mm was taken in the longitudinal direction of paper movement in the machine. It was equal to 0.125 mm in the circumference of the round grid screen cylinder. The width of the paper web in the commodity bobbin was 230 mm. The samples were made from a single sheet of paper sequentially without intermediate cuts at 5 m/s speed of the machine. It was determined that the frequencies of fluctuations of the masses of sanitary paper samples coincide by 86 % with the pulsation frequencies of the pulp and depend on other factors by 14 %. The major frequency was 1.45 Hz. The amplitude of the deviation of the mass at this frequency from the arithmetic mean was 0.026 g. The tensile strength of the paper web in the machine direction was 5.6 times greater than in the transverse direction. It was caused by unregulated rotation frequency of the holey roll and clogging of its holes. The significant change of speed of the pulp flow on the short cylindrical part of the vacuum chambers initiated synchronically low frequency pulsation of the pulp and fluctuations of masses of the paper samples, therefor, the paper web in the machine. The irregularities of the structure of the paper web create the frequent paper breaks and reduced quality of the commodity products.

Authors

Valeriy P. Sivakov, Doctor of Engineering, Prof.; ResearcherID: ААС-6084-2021, ORCID: https://orcid.org/0000-0002-9387-1512
Alesia V. Vurasko*, Doctor of Engineering, Prof.; ResearcherID: AAC-5594-2021, ORCID: https://orcid.org/0000-0002-9471-085X
Alexey L. Sherstobitov, Engineer; ResearcherID: AAC-3200-2022, ORCID: https://orcid.org/0000-0002-7428-2878

Affiliation

Ural State Forestry Engineering University, ul. Sibirskiy trakt, 37, Yekaterinburg,
620100, Russian Federation; sivakovvp@m.usfeu.ru, vurasko2010@yandex.ru*,
theonesunday@gmail.com

Keywords

mass of 1 m2 paper web, pulp pulsation, pulp vibration, mass of paper samples, tensile strength of paper web, round grid screen cylinder, vacuum chamber, holey roll, tissue paper making machine, tissue paper

For citation

Sivakov V.P., Vurasko A.V., Sherstobitov А.L. Reduction of Paper Pulp Fluctuations in Tissue Paper Making Machine. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 1, pp. 186–200. (In Russ.). https://doi.org/10.37482/0536-1036-2023-1-186-200

References

1. Vuong Q.C. New Possibilities for Changing Dynamic Conditions of Vibration Technology Machines. Systems. Methods. Technologies, 2018, no. 2(38), pp. 25–31. (In Russ.). https://doi.org/10.18324/2077-5415-2018-2-25-31

2. Kalita G.A. Headbox of Paper Machines. Scientists Notes PNU, 2018, vol. 9, no. 2, pp. 1165–1168. (In Russ.).

3. Koryakovskaya N.V., Bederdinova O.I. Monitoring and Control of Paper Web Moisture. Lesnoy Zhurnal = Russian Forestry Journal, 2022, no. 1, pp. 188–204. (In Russ.). https://doi.org/10.37482/0536-1036-2022-1-188-204

4. Kugushev I.D., Terent’yev O.A., Kurov V.S., Kokushin N.N., Bel’skiy A.P., Kondrashkova G.A., Konovalov A.B., Korolev V.I., Novikov N.E., Podkovyrin A.I., Smolin A.S., Shvetsov Yu.N., Shul’man G.Z., Eydlin I.Ya. Machines for Production of Paper and Cardboard. Ed. by V.S. Kurov, N.N. Kokushin. Saint Petersburg, SPbPU Publ., 2017. 646 p. (In Russ.).

5. Kutsubina N.V., Sannikov A.A. Vibrodamping of Technological Machines and Equipment of Forestery Complex: Monograph. Yekaterinburg, USFEU Publ., 2008. 210 p. (In Russ.).

6. Muromtsev Yu.A. Fail-Safety and Diagnostics of Violations in Chemical Industries: Methods, Models, Algorithms. Moscow, Khimiya Publ., 1990. 144 p. (In Russ.).

7. Nikolayev A.L., Nozdrachev F.I. Head Box for Paper Making Machine. Patent USSR, no. SU 417565 A1, 1974. (In Russ.).

8. Kiryavajnen A. Apparatus for Damping Oscillation of Paper Pulp Pressure while Feeding a Paper-Making Machine. Patent USSR, no. SU 735184 A3, 1980. (In Russ.).

9. Tikhonov Ju.A., Terent’ev O.A., Shervashidze G.G. Method for Admission of Pulp onto Net of Paper-Making Machine. Patent RF, no. RU 2 061 813 C1, 1996. (In Russ.).

10. Sannikov A.A., Kutsubina N.V., Vasiliev V.V. On the Issue of Determining The Loading, Stress and Vibration States of Tubular Shafts of Paper Making Machines. Novaya nauka: ot idei k rezul’tatu, 2016, no. 10-3, pp. 98–101. (In Russ.).

11. Sannikov A.A., Kutsubina N.V., Dubatovk V.A., Kalimulina T.V., Pereskokov I.V. Methods of Forecasting the Vibration State of Papermaking Machines at Their Speed Planned Increase. Vestnik IzhGTU, 2012, no. 2(54), pp. 16–19. (In Russ.).

12. Sivakov V.P., Vurasko A.V., Vikharev S.N., Artemov A.V. Determination of Sources of Fluctuations in Mass of Label Paper Web in the Machine Direction. The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the 6th International Conference in Memory of Professor Valery Komarov. Arkhangelsk, NArFU Publ., 2021, pp. 372–377. (In Russ.).

13. Sivakov V.P., Vurasko A.V., Leonovich A.A. Fundamentals of Scientific Research in Chemical and Chemical-Mechanical Processings of Vegetal Raw Materials. Yekaterinburg, USFEU Publ., 2021. 169 p. (In Russ.).

14. Sivakov V.P., Vurasko A.V., Minakova A.R. The Influence of Fluctuations in the Mass of Paper Cloth on the Quality of Marketable Products. Systems. Methods. Technologies, 2018, no. 2(38), pp. 133–138. (In Russ.). https://doi.org/10.18324/2077-5415-2018-2-133-138

15. Batchelor W.J., Wu Z., Johnston R.E. Measurement of z-Direction Moisture Transport and Shrinkage in the Drying of Paper. Appita Journal, 2004, vol. 57, no. 2, pp. 107–127.

16. Forughi A.F., Green S.I., Stoeber B. Optical Transparency of Paper as a Function of Moisture Content with Applications to Moisture Measurement. Review of Scientific Instruments, 2016, vol. 87, iss. 2, art. 023706. https://doi.org/10.1063/1.4942251

17. Hallajisani A., Shahbeig H., Hashemi S.J., Murray Douglas W.J. An Experimental Simulation Model for Coated Paper Drying. Brazilian Journal of Chemical Engineering, 2013, vol. 30, iss. 3, pp. 563–573. https://doi.org/10.1590/S0104-66322013000300014

18. Harrmann M., Schulz S. Convective Drying of Paper Calculated with a New Model of the Paper Structure. Drying Technology, 1990, vol. 8, iss. 4, pp. 667–703. https://doi.org/10.1080/07373939008959910

19. Kuharchuk V.V., Katsiv S. Application of Wavelet-Transformations to the Tasks of Monitoring and Diagnostics of Machines and Equipment. Наукові праці ВНТУ = Scientific Works of Vinnytsia National Technical University, 2015, no. 4, рр. 1–7.

20. Åkesson J., Ekvall J. Parameter Optimization of a Paper Machine Model. Paper Presented at Reglermöte. Stockholm, Lund University, 2006. 7 p.