Abrasive Tools Made of Spherical Corundum in Wood Working. P.131-142

Complete text of the article:

Download article (pdf, 0.9MB )

UDС

621.941

DOI:

10.37482/0536-1036-2022-5-131-142

Abstract

In the manufacture of hard abrasive tools for sanding wood and wood-based materials, spherical corundum is an effective material. The use of spherical corundum abrasive wheels makes it possible to increase the productivity of wood sanding, as well as to expand the application area of hard abrasive tools by reducing tool loading and eliminating burns of the treated surface. In order to substantiate the rational conditions of application of abrasive wheels made of spherical corundum it is necessary to determine the dependences linking the surface geometric parameters of the wheel, which directly influence the cutting, with the volume characteristics regulated by the formulation: grain size, content of abrasive grain and binder. The dependencies allow us to assess the nature and degree of influence of tool factors on the distance between the cutting elements of the operating surface of the spherical corundum wheel. The distance between abrasive grains on the wheel surface exceeds the distance between the walls of the abrasive grain in the vast majority of possible ratios of volume characteristics. The greatest influence on the surface geometric parameters has the size of abrasive grains. As it increases, the surface geometric dimensions grow, with a very sharp increase in the distance between abrasive grains on the wheel surface. The second most influential is the profile depth coordinate, which largely determines the ratio of distances between grains and between the grain walls. The relative grain and binder content in the wheel has less influence on the surface properties than the grain size and profile depth. The distance between grains on the wheel surface decreases slightly with their increase; they have no effect on the distance between the abrasive grain walls. The characteristics of the internal volumetric structure (grain size, grain content and binder content) are regulated in the production of abrasive tools. The peripheral surface of the wheel (its relief) is directly involved in the sanding process. For describing the relief of a spherical corundum wheel, it is necessary to determine the relationship between the volume characteristics and its surface geometric parameters, which are necessary to determine all the main parameters of the sanding process

Authors

Alexander V. Sergeevichev¹, Doctor of Engineering, Prof.; ResearcherID: ABC-2274-2020, ORCID: https://orcid.org/0000-0003-3655-207X
Viktoriia A. Sokolova², Candidate of Engineering, Assoc. Prof.;ResearcherID: AAK-6062-2020, ORCID: https://orcid.org/0000-0001-6880-445X
Ivan I. Kostyukov¹, Candidate of Engineering, Assoc. Prof.;ResearcherID: ABC-3176-2020, ORCID: https://orcid.org/0000-0002-3629-8190
Anna Е. Mikhailova¹, Candidate of Engineering, Assoc. Prof.;ResearcherID: ABC-1987-2020, ORCID: https://orcid.org/0000-0003-0280-7409
Sergey A. Voinash³*, Engineer; ResearcherID: AAK-2987-2020,ORCID: https://orcid.org/0000-0001-5239-9883

Affiliation

¹Saint-Petersburg State Forest Technical University named after S.M. Kirov, Institutskiy per., 5, Saint Petersburg, 194021, Russian Federation; 910sav@gmail.com, spb.kostyukov@mail.ru, mikhailovaae@ya.ru
²Saint-Petersburg State University of Industrial Technologies and Design, ul. Bol’shaya Morskaya, 18, Saint Petersburg, 191186, Russian Federation; sokolova_vika@inbox.ru 3OOO “PRO FERRUM”, ul. 1-ya Krasnoarmeyskaya, 1, Saint Petersburg, 198005, Russian Federation; sergey_voi@mail.ru*

Keywords

spherical corundum, spherical corundum abrasive wheels, abrasive grains, intragrain space, surface intragrain space, wood sanding

For citation

Sergeevichev A.V., Sokolova V.A., Kostyukov I.I., Mikhailova A.E., Voinash S.A. Abrasive Tools Made of Spherical Corundum in Wood Working. Lesnoy Zhurnal = Russian Forestry Journal, 2022, no. 5, pp. https://doi.org/10.37482/0536-1036-2022-5-131-142

References

1. Bratan S.M. Identification of Removal Parameters in Combined Grinding. Advanced Technologies and Systems of Mechanical Engineering. Proceedings of the International Collection of Academic Papers. Donetsk, DonGTU Publ., 2000, pp. 24–32.
2. Vinogradov V.N., Sorokin G.M., Kolokol’nikov M.G. Abrasive Wear. Moscow, Mashinostroyeniye Publ., 1990. 224 p. 
3. Gdalevich A.I. Finishing Treatment with Flap Wheel. Moscow, Mashinostroyeniye Publ., 1990. 112 p. 
4. Grishkevich A.A., Kostyuk O.I. Increasing the Operating Period of Grinding Tool in the Processing of Wood. BarSU Herald. Series Engineering, 2015, iss. 3, pp. 17–21. 
5. Kalinin E.P. Theory and Practice of Abrasive Processing Productivity Control with Regard to Tool Blunting: Dr. Eng. Sci. Diss. Abs. Rybinsk, 2006. 34 p.
6. Novoselov Yu.I. Dynamics of Surface Shaping in Abrasive Processing. Sevastopol, SevNTU Publ., 2012. 304 p. 
7. Pereladov A.B., Kamkin I.P. Determination of the Wear Mode of the Tool during Grinding. Izvestia VSTU, 2015, no. 11(173), pp. 24–29.
8. Rybin B.M., Kirillov D.V. Assessment of the Actual Volume of Cavities Irregularities on the Processed Surface of Wood. Lesnoy vestnik = Forestry Bulletin, 2014, no. 4, pp. 131–137. 
9. Sanev V.I., Kamenev B.B., Sergeevichev A.V. Cutting Wood and Wood Materials.Saint Petersburg, Lan’ Publ., 2018. 456 p. 
10. Sergeevichev A.V. The Analysis of Destruction of Abrasive Grains during the Grinding of Wood and Wood Materials. Lesnoy Zhurnal = Russian Forestry Journal, 2015, no. 5,pp. 117–125.https://doi.org/10.17238/issn0536-1036.2015.5.117
11. Silin S.S., Leonov B.N., Khrul’kov V.A., Poletaev V.A. Optimization of Deep Grinding Technology. Moscow, Mashinostroyeniye Publ., 1989. 120 p. 
12. Khvatov B.N., Zubkov D.V., Rodina A.A. Research into Grinding Rate of Abrasive Belt with Self-Sharpening Grain. Transactions of the TSTU, 2012, vol. 18, no. 4, pp. 1031– 1037. 
13. Khromchak I.I. Abrasive Processing of Plate Materials on Mineral Binders: Cand.Eng. Sci. Diss. Abs. Lviv, 1990. 20 p. (In Russ.).
14. Brinksmeier E., Aurich J.C., Govekar E., Heinzel C., Hoffmeister H.-W., Klocke F., Peters J., Rentsch R., Stephenson D.J., Uhlmann E., Weinert K., Wittmann M. Advances in Modeling and Simulation of Grinding Processes. CIRP Annals, 2012, vol. 55, iss. 2,pp. 667–696. https://doi.org/10.1016/j.cirp.2006.10.003
15. Cai G.Q., Feng B.F., Jin T., Gong Y.D. Study on the Friction Coefficient in Grinding. Journal of Materials Processing Technology, 2002, vol. 129, iss. 1-3, pp. 25–29. https://doi.org/10.1016/S0924-0136(02)00569-1
16. Carrano A.L., Taylor J.B. Geometric Modeling of Engineered Abrasive Processes. Journal of Manufacturing Processes, 2005, vol. 7, iss. 1, pp. 17–27. https://doi.org/10.1016/S1526-6125(05)70078-5
17. Sergeevichev A., Kushnerev V., Sergeevichev V., Sokolova V., Onegin V. Analysis of the Influence of Instrumental and Regime Factors on the Quality of Wood Grinding. Journal of Physics: Conference Series, 2020, vol. 1399, iss. 4, art. 044043. https://doi.org/10.1088/1742-6596/1399/4/044043
18. Zhou X., Xi F. Modeling and Predicting Surface Roughness of the Grinding Process. International Journal of Machine Tools and Manufacture, 2002, vol. 42, iss. 8,pp. 969–977. https://doi.org/10.1016/S0890-6955(02)00011-1