The Use of Logging Machinery Sets in the Republic of Bashkortostan. P. 139–152

Complete text of the article:

Download article (pdf, 1.5MB )

UDС

630*37;630*83

DOI:

10.37482/0536-1036-2022-3-139-152

Abstract

The disintegration of the integrated logging enterprises, as well as of the forestry enterprises and the reduced attention of the authorities to the production of specialized machinery and equipment, the logging production process, have led to a decline in the equipment of the logging enterprises with specialized machinery and the effective organization of their operation. Small, privately owned, poorly equipped with machinery logging companies have emerged. Practically we reverted to the technology of the 1960s. Foreign chainsaws are used for felling, delimbing and crosscutting. The skidding operation practically uses general-purpose tractors of МТЗ-80(82) type with the simplest technological equipment – a set of chokers. Some of the larger companies use foreign harvesters and forwarders. According to our research, forestry farms of the Republic of Bashkortostan are in a similar position. In order to increase the level of equipment and improve the organization of its work at the enterprises of the Republic of Bashkortostan we have considered and proposed for use a number of machinery sets. However, practice shows that it is not enough to acquire and equip the production with modern machinery and equipment. A production process must be set up to ensure the effective operation of these machines. Logging as a complex, multi-operated, discrete process can be carried out using a variety of technologies. The most common technology nowadays is the logging and hauling of assortments, for which various harvesting machines and equipment can be used. For the effective operation, harvesting machines performing individual operations are combined into machinery sets. However, current practice shows that it is not possible to match machines and equipment with the same or slightly different capacities. Therefore, the output of such sets is usually equal to, or even lower than, the output of the operation with the lowest capacity. In order to increase the output of the machinery set to the output of the leading machine (the machine with the highest capacity), it is necessary to calculate the modes of operation of machines for specific operating conditions. There are five sets of logging machines offered. The costs that the use of each of them will require are calculated. On the basis of the obtained data it is concluded that in the conditions of the Republic of Bashkortostan it is most economically feasible to use the following set: chainsaw for felling, choker tractor for skidding, two chainsaws for delimbing and crosscutting, lumber carrier for hauling.

Authors

Anatoliy N. Zaikin, Doctor of Engineering, Prof.; ORCID: https://orcid.org/0000-0002-1831-6893
Vladimir V. Sivakov, Candidate of Engineering, Assoc. Prof.; ResearcherID: R-7264-2019, ORCID: https://orcid.org/0000-0002-0175-9030
Nikolay A. Bulkhov, Candidate of Economics, Assoc. Prof.; ORCID: https://orcid.org/0000-0002-0373-374X
Svetlana A. Konshakova, Candidate of Economics, Assoc. Prof.; ORCID: https://orcid.org/0000-0002-3523-1488
Sergey G. Kuznetsov, Candidate of Economics, Assoc. Prof.; ORCID: https://orcid.org/0000-0003-4617-2732

Affiliation

Bryansk State Engineering and Technology University, prosp. Stanke Dimitrova, 3, Bryansk, 241037, Russian Federation; zaikin.anatolij@yandex.ru, sv@bgitu.ru, pismaanick@mail.ru, gler@bk.ru, pro-econom@bgitu.ru

Keywords

logging operations, logging machinery sets, harvesting, harvester, forwarder, organization of machine operation, machine set performance

For citation

Zaikin A.N., Sivakov V.V., Bulkhov N.A., Konshakova S.A., Kuznetsov S.G.
The Use of Logging Machinery Sets in the Republic of Bashkortostan. Lesnoy Zhurnal = Russian Forestry Journal, 2022, no. 3, pp. 139–152. (In Russ.). https://doi.org/10.37482/0536-1036-2022-3-139-152

References

1. Denisov S.A., Toropov A.S., Mikryukova E.V., Volkova L.P., Sharapov E.S., Teterina M.A., Efimov Yu.V., Martynov A.M., Romanov E.G. Justification of Resource-Saving Technologies of the Timber Industry, Adapted to the Natural Conditions of Perm Krai, with Cost Minimization for Reforestation: Research/Research and Development Report (Final). Mari State Technical University. Supervisor S.B. Yakimovich. Grant No. 6.6-29/2 Dated August 3, 2007. State registration No. 2007-01.29. Yoshkar-Ola, Publ., 2007. 500 p. 

2. Zaikin A.N. Simulation of Logging Machines Operation Modes. Lesnoy Zhurnal = Russian Forestry Journal, 2009, no. 1, pp. 71–77. http://lesnoizhurnal.ru/upload/iblock/27d/27d123e35cbb74f7f17b1974f6f195da.pdf

3. Zaikin A.N. Designing of Operation Modes of Logging Machines. Lesnoy vestnik = Forestry Bulletin, 2010, no. 1, pp. 69–76.

4. Zaikin A.N. Mathematical Models for Calculating the Operating Modes of Logging Machines. Siberian Journal of Life Sciences and Agriculture, 2010, no. 4-13(10), pp. 126–130.

5. Zaikin A.N. The Types and Purpose of Timber Stocks in the Process of Timber Production. Lesnoy Zhurnal = Russian Forestry Journal, 2013, no. 3, pp. 71–78. http://lesnoizhurnal.ru/upload/iblock/d4f/le2.pdf

6. Zaikin A.N., Ryzhikova E.G., Teremkova I.I. Method of Operational Planning and Control of Logging Operations. Lesnoy Zhurnal = Russian Forestry Journal, 2017, no. 2, pp. 107–118. https://doi.org/10.17238/issn0536-1036.2017.2.107

7. Zaikin A.N., Konshakova S.A., Sivakov V.V., Kuznetsov S.G., Bulkhov N.A. Technological Resources of Harvesting and Logging Machinery of Bashkortostan Forestries. Lesnoy Zhurnal = Russian Forestry Journal, 2020, no. 4, pp. 123–133. https://doi.org/10.37482/0536-1036-2020-4-123-133

8. Klimushev N.K. Methods and Models of Timber Stock Management: Monograph. Ukhta, USTU Publ., 2001. 76 p.

9. Klimushev N.K. Management of Timber Stocks: Monograph. Moscow, MGUL Publ., 2005. 187 p.

10. Le An Tuan, Smirnova A.I. Economic Approaches to Harvesting Technologies Substantiation in Forest Industrial Holding Company. Lesnoy Zhurnal = Russian Forestry Journal, 2001, no. 5-6, pp. 170–174. http://lesnoizhurnal.ru/upload/iblock/e24/e24ee1b43b9cd-52e8c6d87c1e855e3f0.pdf

11. Forest Plan of the Republic of Bashkortostan. Book 1. Explanatory Note: Approved by the Decree of the Head of the Republic of Bashkortostan Dated December 27, 2018, No. УГ-76С. Ufa, 2018. 337 p.

12. Mokhirev A.P., Goryaeva E.V., Medvedev S.O. Estimation of Technological Processes of Logging Enterprises. Forestry Engineering Journal, 2016, vol. 6, no. 4(24), pp. 139–147. https://doi.org/10.12737/23448

13. Rukomojnikov K.P., Mokhirev A.P. Validation of the Logging Operations Scheme through the Creation of Dynamical Model of the Enterprise Functioning. Lesnoy Zhurnal = Russian Forestry Journal, 2019, no. 4, pp. 94–107. https://doi.org/10.17238/issn05361036.2019.4.94

14. Shegelman I.R., Skrypnik V.I., Kuznecov A.V. Harvesting Machines Performance Analysis and Evaluation of Their Effectiveness in Various Working Environments. Proceedings of Petrozavodsk State University. Series: Natural & Engineering Sciences, 2010, no. 4(109), pp. 66–75.

15. Shegelman I.R., Shchegoleva L.V., Ponomarev A.Yu. Mathematical Model of the Choice of Through Flows of Procurement, Transportation and Processing of Wood Raw Materials. Izvestia Sankt-Peterburgskoj lesotehniceskoj akademii, 2005, no. 172, pp. 32–37.

16. Yakimovich S.B., Volodin I.Yu. Formation of Sets of Logging Machines Based on the State Distribution of the Subject of Labor along the Technological Process Route. Lesnoy vestnik = Forestry Bulletin, 2001, no. 2, pp. 128–136.

17. Yakimovich S.B., Teterina M.A. Classification of Wood Harvesting and Primary Processing Processing-Transporting Systems. Lesnoy vestnik = Forestry Bulletin, 2009, no. 2, pp. 67–73.

18. Carlsson D., D’Amours S., Martel A., Rönnqvist M. Decisions and Methodology for Planning the Wood Fiber Flow in the Forest Supply Chain. Recent Developments in Supply Chain Management. Ed by R. Koster, W. Delfmann. Helsinki, University Press, 2008, pp. 11–39.

19. Henningsson M., Karlsson J., Rönnqvist M. Optimization Models for Forest Road Upgrade Planning. Journal of Mathematical Modelling and Algorithms, 2007, vol. 6, iss. 1, pp. 3–23. https://doi.org/10.1007/s10852-006-9047-0

20. Luce Ch.H. Effectiveness of Road Ripping in Restoring Infiltration Capacity of Forest Roads. Restoration Ecology, 1997, vol. 5, iss. 3, pp. 265–270. https://doi.org/10.1046/j.1526-100X.1997.09731.x

21. Medvedev S., Mokhirev A., Rjabova T. Methodical Approach to Increase Efficiency of Use of Wood Resource Potential of the Region. IOP Conference Series: Earth and Environmental Science, 2019, vol. 316, art. 012036. https://doi.org/10.1088/1755-1315/316/1/012036

22. Mokhirev A., Gerasimova M., Pozdnyakova M. Finding the Optimal Route of Wood Transportation. IOP Conference Series: Earth and Environmental Science, 2019, vol. 226, art. 012053. https://doi.org/10.1088/1755-1315/226/1/012053

23. Pentek T., Nevečerel H., Ecimović T., Lepoglavec K., Papa I., Tomašić Z. Strategijsko planiranje šumskih prometnica u Republici Hrvatskoj – raščlamba postojećega stanja kao podloga za buduće aktivnosti. Nova Mehanizacija Šumarstva, 2014, vol. 35, no. 1, pp. 63–78. (In Croat.).

24. Rukomojnikov K.P. Structuring of Loading Points and Main Skid Road in Conditions of Existing Road Network in Forest Compartment. Journal of Applied Engineering Science, 2015, vol. 13, no. 3, pp. 167–174. DOI: https://doi.org/10.5937/jaes13-8866

25. Trømborg E., Sjølie H., Solberg B., Hovi I.B., Madslien A., Veisten K. Economic and Environmental Impacts of Transport Cost Changes on Timber and Forest Product Markets in Norway. Scandinavian Journal of Forest Research, 2009, vol. 24, iss. 4, pp. 354–366. https://doi.org/10.1080/02827580903035994

26. Zaikin A.N., Mukovnina M.V., Nikitin V.V., Scherbakov E.N. Reducing Industrial Impact on Forest Ecosystems by Improving the Organization of Harvesting Operations. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 2018, vol. 11(60), no. 1, pp. 69–76.

27. Zyryanov M., Medvedev S., Mokhirev A. Study of the Possibility of Using Logging Residue for the Production of Wood Processing Enterprises. Journal of Applied Engineering Science, 2020, vol. 18, no. 1, pp. 15–18. https://doi.org/10.5937/jaes18-22611