Application of the Adobe Photoshop Software Package in Leaf Blade Area Measurement of Woody Plants

Complete text of the article:

Download article (pdf, 0.5MB )

UDС

630*161+581.45

DOI:

https://doi.org/10.37482/0536-1036-2021-5-174-184

Abstract

Mechanical properties are crucial in assessing the paper quality. Deformation and strength properties of paper are determined by the strength and stiffness of the interfiber and intermolecular hydrogen bonds. The contribution ratio of interfiber and intermolecular hydrogen bonds to the strength of paper can be changed by adjusting the degree of its anisotropy. The article presents the results on a study of the deformation properties of laboratory anisotropic paper samples from kraft bleached softwood pulp with a beating degree of 30 °SR. The samples had basic weight of 90 g/m² and the degree of stiffness anisotropy TSIMD/CD of 1.75–4.08. They were made by using Techpap SAS automatic dynamic handsheet former (Grenoble, France), with varying forming parameters – diameter of the nozzle, motion speed of the forming wire, and injecting speed of pulp. Deformation properties were determined by tensile test and processing of the stress-strain dependence (σ−ε). The outcomes have shown that, an increase of the fiber orientation degree in paper structure by changing the forming parameters caused a change in the nature of the paper deformation under tension. Increasing the fiber orientation degree in the structure of paper made it possible to increase the strength by 55 %, tensile stiffness by 63 % in the machine direction, while reducing the extensibility by 10 %. In the cross direction, it was possible to decrease tensile stiffness by 33 %, strength by 55 %, and increase the extensibility by 5 %. Anisotropy of tensile strength was 1.73–6.00. The greatest effect was obtained for the elasticity modulus in the pre-failure zone E2 (2.8–38.6). It means that, fiber orientation had a key importance when large deformations in the samples took place. The established quantitative regularities allowed optimizing the values of the deformation and strength properties of paper, and their ratio in the machine direction and cross direction due to the variation of the forming parameters.

Authors

Ramis N. Babaev, Postgraduate Student; ResearcherID: ABE-8753-2020,
ORCID: https://orcid.org/0000-0003-1604-5505

Affiliation

Nizhny Novgorod State Agricultural Academy, prosp. Gagarina, 97, Nizhny Novgorod, 603107, Russian Federation; e-mail: lp-ram17@yandex.ru

Keywords

forming, FDA, fiber orientation, anisotropy, stiffness, strength

For citation

Rech D., Potasheva A.N., Kazakov Ya.V. Regulating the Deformation Properties of Paper by Varying the Degree of Its Anisotropy. Lesnoy Zhurnal [Russian Forestry Journal], 2021, no. 5, pp. 174–184. DOI: 10.37482/0536-1036-2021-5-174-184

References

Beloglazov V.I., Komarov V.I., Gurjev A.V. Anisotropy of Deformational and Strength Characteristics of Kraft-Liner. Lesnoy Zhurnal [Russian Forestry Journal], 2005, no. 5, pp. 113–118. URL: http://lesnoizhurnal.ru/upload/iblock/513/513fd048ed1675b4a8742e24cd337e24.pdf

Hansson M.T., Rasmuson A. Finite Element Analysis of Three Dimensional Fibre Networks. Nordic Pulp and Paper Research Journal, 2004, vol. 19, iss. 1, pp. 105–111. DOI: https://doi.org/10.3183/npprj-2004-19-01-p105-111

Horng A.J., Fletcher R.S., Mickleborough C.L., Sasaki K.R. A Novel Use of the Dynamic Sheet Former in Paper Recycling: Simulates the Function of New Recycling Devices. Pulp and Paper Canada, 1996, vol. 97, iss. 12, pp. 135–137.

Kazakov Y.V. Practice of Using of Deformation Characteristics for an Estimation of Paper and Cardboard Quality. The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the 1st International Conference. Arkhangelsk, NArFU, 2011, pp. 88–94.

Kazakov Y.V. The Structure and Properties of Laboratory Anisotropic Samples of Pulp and Paper Materials. Tsellyuloza. Bumaga. Karton, 2013, no. 6, pp. 56–60.

Kazakov Y.V. Kinetics of Deformation of Pulp and Paper Materials at Tensile Test. The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the 5th International Conference in Memory of Professor Valery Komarov. Arkhangelsk, NArFU, 2019, pp. 23–31.

Kazakov Y.V., Koncevaya V.I. Mechanics of Anisotropic Laboratory Hand-Made Samples of Pulp-and-Paper Materials. The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the 2nd International Conference in Memory of Professor Valery Komarov. Arkhangelsk, NArFU, 2013, pp. 201–207.

Kazakov Y.V., Romanova A.N., Chukhchin D.G. Effect of Fiber Orientation Anisotropy on the Paper Deformation Properties. The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the 3rd International Conference in Memory of Professor Valery Komarov. Arkhangelsk, NArFU, 2015, pp. 298–303.

Kazakov Ya.V., Komarov V.I. The Software of the Laboratory Test Complex for the Deformability and Strength Evaluation of Pulp and Paper Materials (KOMPLEX). Certificate of the Computer Software Official Registration No. 2001610526, 2001. 1 p.

Komarov V.I. Analysis of the Stress-Strain Relationship under Tensile Testing of Pulp and Paper Materials. Lesnoy Zhurnal [Russian Forestry Journal], 1993, no. 2-3, pp. 123–131. URL: http://lesnoizhurnal.ru/upload/iblock/ef4/123_130.pdf

Komarov V.I., Beloglazov V.I., Gurjev A.V., Sysoeva N.V. Study of the Factors Influencing the Anisotropy of Tensile Stiffness of Cardboard Liner. Tsellyuloza. Bumaga. Karton, 2005, no. 7, p. 48.

Komarov V.I., Kazakov Y.V. Analysis of Mechanical Behavior of Pulp and Paper Materials under Tensile Load. Lesnoy vestnik [Forestry Bulletin], 2000, no. 3(12), pp. 52–62.

Kulachenko A., Uesaka T. Direct Simulations of Fiber Network Deformation and Failure. Mechanics of Materials, 2012, vol. 51, pp. 1–14. DOI: https://doi.org/10.1016/j.mechmat.2012.03.010

Lindblad G., Fürst T. The Ultrasonic Measuring Technology on Paper and Board. Kista, Sweden, Lorentzen and Wettre, 2001. 98 р.

Mourad S., Skali-Lami S., Trehoult C. Instability of the Flow in a Closed Cylindrical Cavity and in a Short-Dwell Cavity. Coating Conference Proceedings. Toronto, 1999, pp. 447–455.

Romanova A.N., Kazakov Y.V. Measurement of Fiber Orientation Degree in Anisotropic Paper Structure. Actual Problems of Metrological Support for Applied Research Practice: Proceedings of the 2nd All-Russian Scientific and Technical Conference of Young Scientists, Postgraduate Students and Students. Arkhangelsk, NArFU, 2016, pp. 219–227.

Skowroński J.W. Modeling of Refining to Save Energy and Define the Impact of Refining Variables on Printability of Inkjet Paper. Part 3. Model to Predict Properties of Oriented Laboratory Sheets. Przeglad Papierniczy, 2011, vol. 67(10), pp. 625–631.

Tosto F.J., Chen J., Oliver J.F. Application of the Dynamic Sheet Former to Simulate Paper Grades Produced from Western Canadian Pulps. Proceedings of the Annual Meeting of the Pulp and Paper Technical Association of Canada, 2001, vol. 87, iss. B, pp. B31–B41.

Uesaka T., Juntunen J. Time-Dependent, Stochastic Failure of Paper and Box. Nordic Pulp and Paper Research Journal, 2012, vol. 27, iss. 2, pp. 370–374. DOI: https://doi.org/10.3183/npprj-2012-27-02-p370-374

Volkel H-G. Economical Lab-Sheet Forming Methods. Proceedings of the European Conference on Pulp and Paper Research: The Present and the Future. Stockholm, 1996, pp. 179–185.

Zhang F.-D., Pei J.-C., Li J., Liu W., Zhou C.-X. The Effect of Speeds of Jet and Wire on the Physical Properties of Paper Sheets Forming in a Dynamic Sheet Former. China Pulp and Paper, 2014, vol. 33(6), pp. 25–30.