Address: Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation, Northern (Arctic) Federal University named after M.V.Lomonosov, office 1425

Phone: +7 (8182) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

Lesnoy Zhurnal

Study of Modified Wood by Electron Microscopy

Версия для печати

V.A. Shamaev

Complete text of the article:

Download article (pdf, 1.9MB )

UDС

674.812.02

DOI:

10.37482/0536-1036-2020-1-190-199

Abstract

Wood modification is a popular method for improvement of wood properties of low-value deciduous species. The method of pressing across the wood fibers preliminarily plasticized with urea was used in order to increase the strength properties. Impregnation with Biol mineral oil was used for the improvement of anti-friction properties. Metallic nickel is introduced into wood in the form of a continuous metal film lining the inner surface of wood cavities for thermal conductivity increasing. Studies carried out with the listed catalog samples using scanning and upright electron microscopes allowed to find, that: carbamide is located in the walls of cells and manifests itself in the cavities very sharply in the form of single crystals; pressing of wood plasticized with urea leads to flattening of anatomical elements without their destruction; Biol oiling with its low content spreads as a film on the cell walls and is not visualized; metallic nickel is present in wood in the form of film and individual elements on the cell walls. Weight and atomic microanalyses of the longitudinal section were performed for it.

Authors

V.A. Shamaev, Doctor of Engineering, Prof.; ResearcherID: Y-9044-2018, ORCID: 0000-0002-1762-7956

Affiliation

Voronezh State University of Forestry and Technologies named after G.F. Morozov, ul. Timiryazeva, 8, Voronezh, 394087, Russian Federation; e-mail: drevstal@mail.ru

Keywords

wood, microstructure, modification, electron microscopy

For citation

Shamaev V.A. Study of Modified Wood by Electron Microscopy. Lesnoy Zhurnal [Russian Forestry Journal], 2020, no. 1, pp. 190–199. DOI: 10.37482/0536-1036-2020-1-190-199

References

1. Shamaev V.A., Uehl’skij A.A., Grebennikov A.V., Storozhenko P.A., Rakhmanov V.G. Method of Wood Modification. Patent RF, no. 2339505, 2008.
2. Shamaev V.A., Medvedev I.N., Galavorjan R.A., Manaev V.A. Plain Bearing and Method of Its Manufacture. Patent RF, no. 2539022, 2015.
3. Shamaev V.A. Bearings of Modified Wood. Vestnik mashinostroyeniya [Russian Engineering Research], 2010, no. 7, p. 45–48.
4. Shamaev V.A., Medvedev I.N. Modified Wood of New Generation for Friction Parts. Polymer Composites and Tribology (POLICOMTRIB-2011): Abstracts of the International Scientific and Technical Conference, Gomel, Belarus, June 27–30, 2011. Gomel, IMMS NANB Publ., 2011, pp. 225–226.
5. Shamaev V.A., Nikulina N.S., Medvedev I.N. Modification of Wood. Moscow, Nauka Publ., 2013. 448 p.
6. Dykstra M.J., Reuss L.E. Biological Electron Microscopy: Theory, Techniques, and Troubleshooting. Springer US, 2003. 534 p. DOI: 10.1007/978-1-4419-9244-4
7. Igaz R., Macek Š., Zemiar J. The Influence of Unidirectional Cyclic Bend Loading on Initial Relaxation Speed of Beech Lamellas. Acta Facultatis Xylologiae Zvolen, 2014, vol. 56, pp. 27–35.
8. Kúdela J., Rešetka M. Influence of Pressing Parameters on Dimensional Stability and Selected Properties of Pressed Beech Wood. I. Dimensional Stability and Density. Acta Facultatis Xylologiae Zvolen, 2012, vol. 54(1), pp. 15–24.
9. Lekounougou S., Kocaefe D., Oumarou N., Kocaefe Y., Poncsak S. Effect of Thermal Modification on Mechanical Properties of Canadian White Birch (Betula papyrifera). International Wood Products Journal, 2011, vol. 2, iss. 2, pp. 101–107. DOI: 10.1179/2042645311Y.0000000016
10. Maunsbach A.B., Afzelius B.A. Biomedical Electron Microscopy: Illustrated Methods and Interpretations. London, Academic Press, 1998. 548 p.
11. Medvedev I.N., Shamayev V.A., Parinov D.A. Resource-Saving Production Sleepers of Modified Wood. Put’ i putevoye khozyaystvo [Railway Track and Facilities], 2018, no. 11, pp. 30–32.
12. Proceedings of IUFRO Meetings in 2006: The 5th International Symposium on Wood Structure and Properties, Sliak, Slovakia, September 3–6, 2006. Ed. by S. Kurjatko, J. Kúdela, R. Lagana. Zvolen, Slovakia, Arbora Publishers, 2006. 522 p.
13. Sandberg D., Haller P., Navi P. Thermo-hydro and Thermo-hydro-mechanical Wood Processing: An Opportunity for Future Environmentally Friendly Wood Products. Wood Material Science & Engineering, 2013, vol. 8, no. 1, pp. 64–88. DOI: 10.1080/17480272.2012.751935
14. Shamaev V., Medvedev I., Parinov D. Study of Modified Wood as a Bearing Material for Machine-Building. Proceedings of the International Conference “Aviamechanical Engineering and Transport (AVENT 2018). 2018, vol. 158, pp. 478–482. DOI: 10.2991/avent-18.2018.92
15. Shamaev V., Medvedev I., Parinov D., Shakirova O., Anisimov M. Investigation of Modified Wood as a Material Power Transmission Pole Produced by Self-Pressing Method. Acta Facultatis Xylologiae Zvolen, 2018, vol. 60(2), pp. 25–32. DOI: 10.17423/afx.2018.60.2.02
16. Shamaev V., Parinov D., Medvedev I. Wood Modification by Pressing. Engineering Studies, 2018, vol. 10, iss. 3(2), pp. 708–718.
17. Šmidriaková M., Kollár M. Modification of Resorcinol Adhesives with Biopolymers for Gluing of Wood with Higher Moisture Content. Acta Facultatis Xylologiae Zvolen, 2011, vol. 53(1), pp. 33–41.
18. The Official Website of Accoya Company. Available at: https://www.accoya.com/ (accessed 23.05.19).
19. Tshabalala M.A., McSweeny J.D., Rowell R.M. Heat Treatment of Wet Wood Fiber: A Study of the Effect of Reaction Conditions on the Formation of Furfurals. Wood Material Science & Engineering, 2012, vol. 7, iss. 4, pp. 202–208. DOI: 10.1080/17480272.2012.669406
20. Wagenführ R., Scheiber C. Holzatlas. Leipzig, WEB Fachbuchverlag, 1989. 720 S.
21. Wahyudi I., Ishiguri F., Makino K., Tanabe J., Tan L., Tuhumury A. et al. Growth Characteristics and Wood Properties of 26-Year-Old Eucalyptus alba Planted in Indonesia. International Wood Products Journal, 2015, vol. 6, iss. 2, pp. 84–88. DOI: 10.1179/2042645315Y.0000000003

Received on May 23, 2019


Study of Modified Wood by Electron Microscopy

 

Make a Submission


ADP_cert_2025.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2025"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png