Fibrous Interlayer Model at Milling

Complete text of the article:

Download article (pdf, 0.3MB )

UDС

676. 1.052.78

DOI:

Abstract

The paper studied fibrous interlayer in the clearance between the rotor and stator. The authors have developed and studied a model of fibrous interlayer at milling at fluid and boundary friction of tackings. Interlayer models at these types of friction and at periodic effect of tacking blades on the interlayer were substantiated. This is the first comprehensive research of its kind. The authors have developed a mathematical model and validated it experimentally. The paper shows how the degree of milling and the average length of fiber in the mass change at compression strain on the fibrous interlayer. An equation of fibrous interlayer model deformation at fluid and boundary types of friction was obtained. Conditions for directed milling were investigated.

Authors

S.N. Vikharev, Candidate of Engineering, Associate Professor; S.A. Dushinina, Postgraduate Student

Affiliation

The Ural State Forest Engineering University

Keywords

fibrous interlayer, tacking, strain, deformation.

References

1. Laptev L.N., Legotskiy S.S., Mel'nik E.A., Sedykh V.V. Analiz mekhanizma fibrillyarnogo razrusheniya tsellyuloznogo materiala v zone kontakta garnitury diskovykh mel'nits [Analysis of the Mechanism of Fibrillar Destruction of Cellulose Material in the Contact Zone of Disk Mills]. Khimiya i khimicheskaya tekhnologiya drevisiny : Mezhvuz. sb. nauch. tr. [Chemistry and Chemical Technology of Wood: Interuniversity Collected Papers]. Krasnoyarsk, 1976, iss. 4, pp. 45–52. 2. Vikharev S.N. Eksperimental'nye issledovaniya protsessa razmola pri pomoshchi vibratsii na garniture statora [Experimental Studies of Grinding by Vibration of Stator Tacking]. Mashiny i apparaty TsBP: Mezhvuz. sb. nauch. tr. [Machines and Mechanisms of PPI: Interuniversity Collected Papers]. Leningrad, 1990, pp. 29–33. 3. Dobrovol'skiy D.S. Rol' mekhanicheskikh vozdeystviy pri razmole voloknistykh polufabrikatov [The Role of Mechanical Action at Grinding of Fiber Semi-Products]. Moscow, 1965. 48 p. 4. Becker H. Frequency and Temperature in Chip Refining. Paperi ja Pou, 1977, no. 3, pp. 123–130.