Crossing Angle Determination for Cutting Edge of Straightline Knives in Two-faced Configuration of Blade Milling Machines

Complete text of the article:

Download article (pdf, 0.2MB )

UDС

676.1.053.33 (088.8)

DOI:

Abstract

The technique of crossing angle determination for cutting edges of knives under two-faced configuration of working faces tracking of rotor and stator typefaces is provided. The analytical dependence for random crossing angles of cutting edges of rotor and stator knives is obtained. The specification of configuration character for rotor and stator knives cutting edges is carried out that allows to ensure wide possibilities for performing analysis of affecting character on fibrous semi-finished product over the whole ring working face of a disc from the input circular edge to the output one.

Authors

V.I. Kovalev, Yu.D. Alashkevich Siberian State Technological University

Affiliation

Siberian State Technological University

Keywords

input parameters, headset, chopper, circumferential edge, grinding surface, cutting edge, tilt angle, rotation angle, crossing angle.