Effect of Addition of Chopped Needles on the Fiberboard Quality Indicators

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

674.817-41

DOI:

https://doi.org/10.37482/0536-1036-2021-3-125-132

Abstract

Until recently, only the trunk of a tree was recognized as valuable in the forest industry, and everything else, including the crown, was considered waste. Logging wastes cluttered felling sites and created a favorable environment for habitation and reproduction of forest pests, as well as contributed to the emergence of forest fires. Today, wood greens are used as a raw material in the logging industry for the production of pellet fuels; in the woodchemical complex for the manufacture of chlorophyll-carotene pastes, sodium chlorophyllin, and coniferous healing extract; in agro-industrial production to obtain coniferous vitamin flour. Analysis of literature sources showed that fibreboards are widely used in housing construction as structural, finishing, and insulating materials. The advantage of fibreboards is the ability to impart special properties to them, such as fire resistance, water resistance, biostability, soundproofing, and heat-insulating ability by adding various components to the fibreboard at the manufacturing stage. Studies of the effect of adding coniferous flour on the quality indicators and physical and mechanical parameters of the finished fiberboard have been carried out in order to solve the problem of expanding the raw material base for fiberboard production. The possibility of using this raw material in the form of coniferous flour in the production of fiberboard has been substantiated. The influence of the percentage of needle flour in the total volume of wood fiber pulp and particle size on the qualitative indicators of the material is shown. Statistical and mathematical equations and graphical dependencies have been obtained. They allow predicting the indicators of fiberboards for a given content and particle size of flour from coniferous greens. The optimal size of the particles of coniferous flour and its content in the fibreboard at which the values of physical and mechanical indicators of the finished product meet the requirements of the State Standard GOST 4598-86 are determined.

Authors

Mikhail A. Zyryanov, Candidate of Engineering, Assoc. Prof.; ResearcherID: N-6950-2016, ORCID: https://orcid.org/0000-0003-4525-2124
Sergey O. Medvedev, Candidate of Economics; ResearcherID: N-8240-2016, ORCID: https://orcid.org/0000-0001-7459-3150
Aleksandr P. Mokhirev, Candidate of Engineering, Assoc. Prof.; ResearcherID: N-9961-2019, ORCID: https://orcid.org/0000-0002-1692-3323

Affiliation

Lesosibirsk Branch of Reshetnev Siberian State University of Science and Technology, ul. Pobedy, 29, Lesosibirsk, Krasnoyarsk Krai, 662543, Russian Federation; e-mail: zuryanov13@mail.ru, medvedev_serega@mail.ru, ale-mokhirev@yandex.ru

Keywords

fiberboard, static bending strength, fibreboard density, wood greens, needles, wastes, fiber, logging residues

Funding

The research was funded by the grant of the President of the Russian Federation for young scientists – candidates of sciences МК-1902.2019.6. The project “Development and Implementation of an Effective Technology for Integrated Processing of Logging Waste” was supported by the Krasnoyarsk Regional Fund of Science.

For citation

Zyryanov M.A., Medvedev S.O., Mokhirev A.P. Effect of Addition of Chopped Needles on the Fiberboard Quality Indicators. Lesnoy Zhurnal [Russian Forestry Journal], 2021, no. 3, pp. 125–132. DOI: 10.37482/0536-1036-2021-3-125-132

References

1. Bezrukikh Yu.A., Medvedev S.O., Alashkevich Yu.D., Mokhirev A.P. Environmental Management in the Conditions for Sustainable Economic Development Industrial Forestry Complex Enterprises. Ekonomika i predprinimatel’stvo [Journal of Economy and entrepreneurship], 2014, no. 12-2, pp. 994–996.
2. Goncharov V.N. Theoretical Foundations of Grinding Fibrous Materials in Knife Machines: Dr. Eng. sci. Diss. Leningrad, 1990. 474 p.
3. Zyryanov M.A., Dresvyankin I.A., Rubinskaya A.V. Experimental and Theoretical Study of Physical and Chemical Transformations of Woody Biomass in the Production Technology of Fibreboard. Inženernyj vestnik Dona [Engineering Journal of Don], 2016, no. 4.
4. Zyryanov M.A., Chistova N.G., Lazareva L.I. Improving the Work of the Grinding Site for the Production of Fiberboard by the Wet Method. Khimija Rastitel’nogo Syr’ja [Chemistry of plant raw material], 2011, no. 3, pp. 193–196.
5. Zyryanov M.A., Chistova N.G., Shvetsov V.A., Zaripov Z.Z. Wood Waste Processing for the Wood-Fiber Panels Production. Vestnik KrasGAU [The Bulletin of KrasGAU], 2010, no. 4, pp. 288–291.
6. Korotayev E.I., Simonov V.I. Production of Building Materials from Wood Waste. Moscow, Lesnaya promyshlennost’ Publ., 1972. 144 p.
7. Mokhirev A.P., Aksenov N.V., Sheverev O.V. On the Rational Management and Exploitation of Resources in the Krasnoyarsk Region. Inženernyj vestnik Dona [Engineering Journal of Don], 2014, no. 4-1.
8. Nikishov V.D. Integrated Use of Wood. Moscow, Lesnaya promyshlennost’ Publ., 1985. 264 p.
9. Chistova N.G., Alashkevich Yu.D. Preparation of Wood Fiber for Fiberboard Production. Lesnoy Zhurnal [Russian Forestry Journal], 2009, no. 4, pp. 123–128. URL: http://lesnoizhurnal.ru/upload/iblock/22b/22be9800bbc205d4ddd76006f1a62e21.pdf
10. Bens O., Hüttl R.F. Energetic Utilisation of Wood as Biochemical Energy Carrier – a Contribution to the Utilisation of Waste Energy and Landuse. International Journal of Thermal Sciences, 2001, vol. 40, iss. 4, pp. 344–351. DOI: https://doi.org/10.1016/S1290-0729(00)01220-5
11. Chornyy O. Influence of the Bretton Woods Institutions on Economic Growth: Literature Survey for Transitional Economic Systems. Economics & Sociology, 2011, vol. 4, no. 2, pp. 32–41. DOI: https://doi.org/10.14254/2071-789X.2011/4-2/4
12. Fergusоn W. Wood Pulp Is Surprise New Wonder Material. New Scientist, 2012, vol. 215, iss. 2878, p. 24. DOI: https://doi.org/10.1016/S0262-4079(12)62122-8
13. Forests and Forestry in Sweden. Stockholm, Royal Swedish Academy of Agriculture and Forestry (KSLA), 2015. 24 p. Available at: https://www.skogsstyrelsen.se/globalassets/in-english/forests-and-forestry-in-sweden_2015.pdf (accessed 12.03.20).
14. Goldstein J. Finding New Markets for Local Waste Wood. BioCycle, 2002, vol. 43, no. 12, p. 30.
15. Hellen E. Beyond Paper and Board – Leap in Resource-Efficiency with Nanocellulose and New Forming Techniques. Forestcluster Ltd’s Annual Seminar. Helsinki, 2011. 25 p.
16. Mokhirev A.P., Pozdnyakova M.O., Medvedev S.O., Mammatov V.O. Assessment of Availability of Wood Resources Using Geographic Information and Analytical Systems (the Krasnoyarsk Territory as a Case Study). Journal of Applied Engineering Science, 2018, vol. 16, no. 3, pp. 313–319. DOI: https://doi.org/10.5937/jaes16-16908
17. Shi S.Q., Gardner D., Pendleton D., Hoffard T. Timber Production from Reclaimed Creosote-Treated Wood Pilings: Economic Analysis and Quality Evaluation. Forest Products Journal, 2001, vol. 51, no. 11-12, pp. 45–50.
18. Wood Waste Reduction. Pollution Prevention Institute. Topeka, Kansas State University, 2006. 12 p.
19. Zozulya V.V., Romanchenko O.V., Zuykov A.V., Sergeeva A.Yu., Medvedev S.O., Zozulya I.V. Financial Stimulation of Forest Resources Deep Processing. Journal of Advanced Research in Law and Economics, 2017, vol. 8, no. 1, pp. 312–318.
20. Zozulya V.V., Sakhanov V.V., Medvedev S.O., Bezrukih Y.A., Romanchenko O.V. The Features of Industrial Modernization Management in Forest Complex. Proceedings of the 17th International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management (SGEM 17). Albena, SGEM, 2017, pp. 927–934.