![]() Address: Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation, Northern (Arctic) Federal University named after M.V.Lomonosov, office 1425
Phone: +7 (8182) 21-61-18 Lesnoy Zhurnal |
S.A. Gordeyko, N.V. Chernaya, E.P. Shishakov Complete text of the article:Download article (pdf, 0.5MB )UDС676.12DOI:10.17238/issn0536-1036.2015.5.165AbstractThe paper is devoted to the study of the strengthening connections effect, based on synthetic rubber latex and polyaminoamide compounds in the sizing in acidic (pH 4.8–5.2), neutral (pH 6.5–7.2) and weakly alkaline (pH 7.3–7.8) media, on the hydrophobicity and strength of the paper samples. Now the polyamideamine-epichlorohydrin (Melapret PAE/A, Maresin, etc.), melamine-formaldehyde and urea-formaldehyde resins are applied to reinforce the paper and cardboard to be resistant in dry and wet conditions. The resins are introduced into the pulp containing natural and synthetic sizing agents with hydrophobic properties in acidic, neutral and weakly alkaline media. A variety of natural sizing agents in the form of modified resina hydrodispersions are used for fiber suspension sizing in acidic and neutral media, and synthetic – in neutral and weakly alkaline media. The processes of sizing and hardening are competing. Therefore, the studies of the synthetic polymers with a strengthening effect on the sized paper and cardboard produced at pH 4.8–7.8 are of special scientific and practical interests. The mission of the paper is the developing of a technological mode of water-repellency treatment and the reinforcement of scrap paper and basic layers of cardboard in acidic, neutral and weakly alkaline media in the presence of synthetic polymers based on the synthetic rubber latex and polyaminoamide compounds. We started with a selection of fiber suspension model (pulp, simulating the secondary fibrous raw material – waste paper by its fractional composition and papermaking properties), and then we administered the hydrophobic agents such as the modified resina hydrodispersion (a reinforced size of TM brand) and AKD dispersions of Dymar VP 738 brand and synthetic polymers providing a strengthening effect on the basic paper and cardboard layers manufactured from the secondary (waste paper) raw materials. As the polymer compounds we used a cationic starch of Hi Cat brand (“Roquette”, France), polyamideamine-epichlorohydrin resin (Melapret PAE/A (“Kemiopol”, Poland)) and a new polymer obtained at the Department of chemical processing of wood of Belarusian State Technological University – the polycondensate of hexandioic acid with diethylenetriamine, modified by rosin acids, and styrene-acrylate dispersion Acronal 290 D (“BASF”, Germany). From the resulting pulp the paper samples and basic cardboard layers were prepared, and dry hydrophobicity and strength were determined.AuthorsS.A. Gordeyko, Postgraduate StudentN.V. Chernaya, Doctor of Engineering, Professor
E.P. Shishakov, Candidate of Engineering
AffiliationBelarusian State Technological University, Sverdlova st., 13, block A, Minsk, 220050, Bela-rus; е-mail: svetastar1988@mail.ruKeywordswaste paper, paper sizing, reinforcement, cationic starch, polyamideamine-epichlorohydrin resin, synthesized polyaminoamide polymer, styrene-acrylate dispersion.References1. Andreev A.I., Selyanina S.B., Bogdanovich N.I. Sorbtsionnye svoystva listven-nykh i khvoynykh sul'fatnykh ligninov [Sorption Properties of Hardwood and Softwood Sulfate Lignins]. Khimiya rastitel'nogo syr'ya, 2012, no. 2, pp. 33–39. 2. Gribkov I.V., Krutov S.M., Zarubin M.Ya. Izuchenie stroeniya i svoystv promysh-lennykh gidroliznykh ligninov [The Structure and Properties of Industrial Hydrolysis Lig-nin]. Izvestiya SPbGLTA, 2007, no. 179, 1. Kolesnikov V.L. Bumaga i karton iz voloknisto-polimernykh kompozitsiy [Paper and Board Produced from Fibrous and Polymeric Furnishing]. Minsk, 2004. 274 p. 2. Kuleshov A.V., Osipov A.S. Vliyanie tsiklichnosti ispol'zovaniya makulaturnogo volokna na bumagoobrazuyushchie svoystva [Effect of Cyclical Use of Recycled Fiber on the Paper-Forming Properties]. Lesnoy zhurnal, 2008, no. 4, pp. 132–139. 3. Osipov P.V. Sovershenstvovanie proizvodstva produktsii so svoystvami vlago-prochnosti [Rationalization of Production of Wet-Strength Properties]. Nauka i tekhnologi-ya, 2012, no. 7, pp. 56–59. 4. Chernaya N.V., Zholnerovich N.V. Tekhnologiya bumagi i kartona: metod. ukaza-niya k laboratornym rabotam [Technology of Paper and Paperboard: Laboratory Operations Manual]. Minsk, 2006. 56 p. 5. Chernaya N.V., Kolesnikov V.L, Zholnerovich N.V. Tekhnologiya proizvodstva bumagi i kartona [Technology of Paper and Board Industry]. Minsk, 2013. 435 p. 6. Fleysher V.L. Poluchenie importzameshchayushchego azotsoderzhashchego poli-mera s uprochnyayushchim deystviem na makulaturnye vidy bumagi i kartona [Preparation of Import Substitution Nitrogenated Polymer with Reinforcement on Scrap Paper and Cardboard]. Materialy. Tekhnologiya. Instrumenty, 2014, no. 1, pp. 87–89.Received on December 15, 2014
Reinforcement of Scrap Paper and Recycled Cardboard Sized in Acidic, Neutral and Weakly Alkaline Media |
Make a Submission
Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024" INDEXED IN:
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
![](/img/transparent.gif)