![]() Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425
Phone / Fax: (818-2) 21-61-18 Archive |
![]() These works are licensed under a Creative Commons Attribution 4.0 International License. V.I. Posmetyev, V.O. Nikonov, V.V. Posmetyev Complete text of the article:Download article (pdf, 0.8MB )UDС629.11.02/.098DOI:10.17238/issn0536-1036.2019.4.108AbstractOne of the most promising and feasible ways to reduce the fuel consumption of a forest truck with a trailer is the development and support of the operation of its recuperative towing coupler. A fundamentally new scheme of the device was proposed based on the previous studies. In order to assess the possibility of its usage in a forest truck with a trailer, find the range of recoverable power, determine the optimal design parameters of the hydraulic cylinder of the coupler a three-dimensional mathematical model of a forest truck with a trailer movement along uneven support surface has been created based on the classical mechanics methods. A computer program was created based on this model. The program allowed to obtain the dependences of speed of a forest truck with a trailer, height of the supporting surface irregularities and hydraulic cylinder diameter of the recuperative towing coupler on the mean values of the average recoverable power and longitudinal acceleration. It is found that the operation of a forest truck with a trailer, equipped with a recuperative towing coupler, on forest roads with ground coating allows recuperating the power of 4 kW. The recoverable power changes with the increase of the movement speed of a forest truck with a trailer along the forest road with ground coating according to a quadratic law. It has been found that with the increase of the average height of the supporting surface irregularities to 0.4 m, the increase of the mean values of the recoverable power and longitudinal acceleration of the trailer occurs according to a law close to quadratic, however, a further increase of the height of the supporting surface irregularities does not lead to the significant growth of the parameters. The optimal diameter of the hydraulic cylinder for the recuperative towing coupler, which allows recuperating the highest power value at a high efficiency of the damping properties of the hy draulic system, is determined. The research results can be used by research and development organizations in the development and improvement of recuperative towing couplers of forest trucks with a trailer.AuthorsV.I. Posmetyev, Doctor of Engineering, Prof.; ResearcherID: Q-1411-2015, ОRCID: 0000-0001-9878-7451V.O. Nikonov, Candidate of Engineering, Assoc. Prof.; ORCID: 0000-0002-7380-9180 V.V. Posmetyev, Candidate of Physics and Mathematics, Assoc. Prof.; ОRCID: 0000-0001-6622-5358 AffiliationVoronezh State University of Forestry and Technologies named G.F. Morozov, ul. Timiryazeva, 8, Voronezh, 394087, Russian Federation; e-mail: posmetyev@mail.ru, 8888nike8888@mail.ru, victorvpo@mail.ruKeywordsforest truck, trailer, towing coupler, recovery, hydraulic power, working fluid, hydropneumatic accumulator, mathematical model, simulation modelingFor citationPosmetyev V.I., Nikonov V.O., Posmetyev V.V. Computer Simulation of the Recuperative Towing Coupler of a Forest Truck with a Trailer. Lesnoy Zhurnal [Forestry Journal], 2019, no. 4, pp. 108–123. DOI: 10.17238/issn0536-1036.2019.4.108References1. Adler Yu.P., Markova E.V., Granovskiy Yu.V. Planning an Experiment in the Search of Optimal Conditions. Moscow, Nauka Publ., 1976. 279 p.2. Granovskiy V.A., Siraya T.N. Methods of Processing Experimental Data in Measurements. Leningrad, Energoatomizdat Publ., 1990. 288 p. 3. Troitskiy V.A., Ivanova I.M., Starostin I.A., Shelest V.D. Engineering Calculations on a Computer. Ed. by V.A. Troitskiy. Leningrad, Mashinostroyeniye Publ., 1979. 288 p. 4. Kuz’michev D.A., Radkevich I.A., Smirnov A.D. Automation of Experimental Studies: Educational Textbook. Moscow, Nauka Publ., 1983. 392 p. 5. Mudrov A.E. Numerical Methods for PC in Terms of Basic, Fortran and Pascal. Tomsk, MP “RASKO” Publ., 1991. 272 p. 6. Nikonov V.O., Posmetev V.I., Juravlev R.V. Analysis of Constructive Features of Tractor-Clutch Devices of Cargo Vehicles with Trailers. Voronezhskiy nauchnotekhnicheskiy vestnik, 2018, vol. 4, no. 4(26), pp. 13–24. 7. Nikonov V.O., Posmetev V.I., Posmetev V.V. Estimation of the Efficiency of the Forest Vehicle with Energy Energy in the Wheel Hydromotors on the Basis of Computer Modeling. Mir transporta i tekhnologicheskikh mashin [The world of transport and technological machinery], 2018, no. 3(62), pp. 46–54. 8. Nikonov V.O., Posmetev V.I., Yakovlev K.A. Hydraulic Energy Recovery in a Tractor-Clutch Device of Timber Truck with a Trailer. Lesotekhnicheskiy zhurnal [Forestry Engineering Journal], 2018, no. 4, pp. 230–239. DOI: 10.12737/article_5c1a323b1d0433.96668845 9. Novikov E.A., Knaub L.V. Numerical Methods for Ordinary Differential Equations and Dynamic Systems: Educational Textbook. Krasnoyarsk, SibFU Publ., 2010. 112 p. 10. Posmetev V.I., Nikonov V.O. Substantiation of the Scheme of a Forest Vehicle Equipped with the Perspective Design of the Wheel Module with a Hydraulic Drive. Mir transporta i tekhnologicheskikh mashin [The world of transport and technological machinery], 2017, no. 3(58), pp. 27–34. 11. Samarskiy A.A., Gulin A.V. Numerical Methods: Educational Textbook for Universities. Moscow, Nauka Publ., 1989. 432 p. 12. Sovetov B.Ya., Yakovlev S.A. System Modeling: Textbook for Universities. Moscow, Vysshaya shkola Publ., 1998. 319 p. 13. Abu-Hamdeh N.H., Al-Jalil H.F. Computer Simulation of Stability and Control of Tractor-Trailed Implement Combinations under Different Operating Conditions. Bragantia, Compinas, 2004, vol. 63, no. 1, pp. 149–162. 14. Dindorf R., Woś P. Development of Energy Efficient Hydrostatic Drives with Energy Recovery. Mechanik, 2017, no. 8-9, pp. 776–782. DOI: 10.17814/mechanik.2017.8-9.114 15. Fang Z., Guo X., Xu L., Zhang H. Experimental Study of Damping and Energy Regeneration Characteristics of a Hydraulic Electromagnetic Shock Absorber. Advances in Mechanical Engineering, 2013, vol. 2013, art. 943528. DOI: 10.1155/2013/943528 16. Heikkilä M., Linjama M. Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System. Proceedings of the 13th Scandinavian International Conference on Fluid Power, Linköping, Sweden, June 3–5, 2013. Linköping, Scandinavian International Conference on Fluid Power, 2013, pp. 1–7. 17. Posmetev V.I., Nikonov V.O., Posmetev V.V. Investigation of the Energy-Saving Hydraulic Drive of a Multifunctional Automobile with a Subsystem of Accumulation of Compressed Air Energy. IOP Conf. Series: Materials Science and Engineering, 2018, vol. 441, art. 012041. DOI: 10.1088/1757-899X/441/1/012041 18. Wang R., Jiang Q., Ye Q., Chen L., Meng X. Characteristics Analysis and Experiment of Hydraulic Interconnected Energy-Regenerative Suspension. Transactions of the Chinese Society for Agricultural Machinery, 2017, vol. 48(8), pp. 350–357. DOI: 10.6041/j.issn.1000-1298.2017.08.042 19. Zhang H., Guo X., Xu L., Hu S., Fang Z. Parameters Analysis of Hydraulic-Electrical Energy Regenerative Absorber on Suspension Performance. Advances in Mechanical Engineering, 2014, vol. 2014, art. 836502. DOI: 10.1155/2014/836502 20. Zou J., Guo X., Xu L., Abdelkareem M.A.A., Gong B., Zhang J., Tan G. Simulation Research of a Hydraulic Interconnected Suspension Based on a Hydraulic Energy Regenerative Shock Absorber. SAE Technical Paper 2018-01-0582, 2018. DOI: 10.4271/2018-01-0582 Received on March 01, 2019 Computer Simulation of the Recuperative Towing Coupler of a Forest Truck with a Trailer |
Make a Submission
Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024" INDEXED IN:
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
![](/img/transparent.gif)