Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

The Use of Modern Design Methods in Saw Machine Development

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

G.F. Prokof’ev, M.Yu. Kabakova, T.V. Tsvetkova

Complete text of the article:

Download article (pdf, 0.8MB )

UDС

621.933.3

DOI:

10.17238/issn0536-1036.2019.1.128

Abstract

Modern equipment must comply with the production intensification requirements: price acceptable to consumer, high quality and low prime cost. Patent clearance factor is also important. Quality of equipment can be described by its efficiency, economic performance (economical effect, cost effectiveness, payoff period), power consumption, reliability, ergonomics, aesthetic qualities, environmental compliance, exploitation safety, maintainability and possibility of recycling. Prime cost includes personnel costs, carrying out applied researches, testing of patent clearance and patent search, raw materials and supplements, energy, manufacturing and assembling, maintenance and operation of technological equipment, product sales. Patent clearance is a legal property of a technological item. This means its ability to be freely used in the country without infringement of patents. Saw machine designers should use modern design methods to meet the requirements mentioned above. The article describes the examples of using these methods for development the sawmill equipment.

Authors

G.F. Prokof’ev, Doctor of Engineering Sciences, Professor
M.Yu. Kabakova, Candidate of Engineering Sciences, Associate Professor
T.V. Tsvetkova, Senior Lecturer

Affiliation

Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation;
e-mail: g.prokofjev@narfu.rum.kabakova@narfu.rut.tsvetkova@narfu.ru

Keywords

inversion, empathy, analogy, balancing, combination, building block approach, compounding, succession in designing

For citation

Prokof’ev G.F., Kabakova M.Yu., Tsvetkova T.V. The Use of Modern Design Methods in Saw Machine Development. Lesnoy Zhurnal [Forestry Journal], 2019, no. 1, pp. 128–140. DOI: 10.17238/issn0536-1036.2019.1.128

References

1. Prokof’ev G.F. Lentochnopil’nyy stanok [Bandsaw Machine]. Authorship Certificate USSR, no. 1802797/29-33. 1973.
2. Prokof’ev G.F. Lesopil’naya rama [Frame Saw Machine]. Authorship Certificate USSR, no. 2172643/29-1. 1979.
3. Prokof’ev G.F. Mekhanizm nepreryvno-peremennoy podachi lesopil’noy ramy [The Mechanism of Continuous-Intermittent Feed of the Frame Saw Machine]. Authorship Certificate USSR, no. 2610746/29-12. 1979.
4. Prokof’ev G.F. Lentochnopil’nyy stanok [Bandsaw Machine]. Authorship Certifi-cate USSR, no. 261072/29-15. 1981.
5. Balagurov N.N. Uravnoveshivaniye vozmushchayushchikh sil lesopil’nykh ram [Balancing the Exiting Forces of a Frame Saw Machine]. Mekhanicheskaya obrabotka drevesiny, 1971, no. 9, pp. 12–13.
6. Veselovskiy O.N., Konyayev A.Yu., Sarapulov F.N. Lineynyye asinkhronnyye dvigateli [Linear Induction Motors]. Moscow, Energoatomizdat Publ., 1991. 256 p. (In Russ.)
7. Deryagin R.V. Uravnoveshivaniye krivoshipno-polzunnogo mekhanizma lesopil’noy ramy [Balancing the Slider-Crank Mechanism of a Frame Saw Machine]. Sovremennyye metody i sredstva uravnoveshivaniya mashin i priborov: tez. dokl. vsesoyuz.nauch.-tekhn. konf. [Modern Methods and Means of Balancing Machines and Instruments: Report Abstracts of the All Union Sci.-Tech. Conf.]. Moscow, 1979, pp. 78–79.
8. Kozhevnikov S.N. Teoriya mekhanizmov i mashin: ucheb. posobiye dlya vuzov [Theory of Machines and Mechanisms: Educational Textbook for Higher Educational Insti-tutions]. Moscow, Mashinostroyeniye Publ., 1969. 583 p. (In Russ.)
9. Malakhov I.K. Raschet, konstruirovaniye, proizvodstvo i ekspluatatsiya lesopil’nykh ram [Calculation, Design, Production and Use of Frame Saw Machines]. Moscow, Lesnaya promyshlennost’ Publ., 1965. 436 p. (In Russ.)
10. Prokof’ev G.F., Ivankin I.I. Mnogopil’nyy lentochnopil’nyy stanok gibkikh avtomatizirovannykh liniy [Multi-Belt Saw]. Patent RF, no. 2305625. 2007.
11. Esterer M. Prisposobleniye dlya uravnoveshivaniya postupatel’no dvizhushchikhsya mass lesopil’noy ramy [The Device for Balancing the Recipocating Masses of the Frame Saw Machine]. Patent FRG, no. 2117306. 1978.
12. Politekhnicheskiy slovar’. Editor in Chief A.Yu. Ishlinskiy. Moscow, Sovetskaya entsiklopediya Publ., 1980. 656 p.
13. Prokof’ev G.F. Intensifikatsiya pileniya drevesiny ramnymi i lentochnymi pilami [Intensification of Timber Sawing with Frame and Band Saws]. Moscow, Lesnaya promyshlennost’ Publ., 1990. 240 p. (In Russ.)
14. Prokof’ev G.F., Varfolomeyev Yu.A. Primeneniye krivoshipno-kulisnogo mekhanizma v kachestve mekhanizma soglasovaniya skorostey rezaniya i podachi lesopil’noy ramy [The Use of Crack-Rocker Mechanism as a Mechanism of Speed Matching of Frame Saw Machine Cutting and Feed]. Lesnoy Zhurnal [Forestry Journal], 1990, no. 3, pp. 73–77.
15. Prokof’ev G.F., Ivankin I.I. Povysheniye effektivnosti pileniya drevesiny na lesopil’nykh ramakh i lentochnopil’nykh stankakh: monogr. [Improving the Efficiency of Timber Sawing on Frame Saw and Bandsaw Machines: Monography]. Ed. by G.F. Prokof’ev. Arkhangelsk, ASTU Publ., 2009. 380 p. (In Russ.)
16. Fil’kevich V.Ya. Uravnoveshivaniye mass lesopil’nykh ram [Mass Balancing of Frame Saw Machines]. Moscow, Goslesbumizdat Publ., 1961. 116 p. (In Russ.)
17. Yakunin N.K., Marnautov G.E. Uravnoveshivaniye sil inertsii v lesopil’nykh ramakh [Balancing the Fictitious Forces in Frame Saw Machines]. Derevoobrabatyvayushchaya promyshlennost’ [Woodworking Industry], 1978, no. 4, pp. 10–12.
18. Holzweissig F., Meltzez G. Meßtechnik der Maschinendynamik. Leipzig, Fachbuchverlag, 1978. 418 S.
19. Kuhnert E., Hunger P. Schwingungsstillung an Gattersägemaschinen. Holzindustrie, 1976, Bd. 2, S. 58–60.

Received on January 18, 2018


The Use of Modern Design Methods in Saw Machine Development

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png