Fraud Warning
We officially declare that NO MONEY from authors and members of the Editorial Board IS CHARGED! A big request to ignore spam e-mails.

Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

Archive

Crossing Angle Determination for Cutting Edge of Straightline Knives in Two-faced Configuration of Blade Milling Machines

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

V.I. Kovalev, Yu.D. Alashkevich

Complete text of the article:

Download article (pdf, 0.2MB )

UDС

676.1.053.33 (088.8)

DOI:

Annotation

The technique of crossing angle determination for cutting edges of knives under two-faced configuration of working faces tracking of rotor and stator typefaces is provided. The analytical dependence for random crossing angles of cutting edges of rotor and stator knives is obtained. The specification of configuration character for rotor and stator knives cutting edges is carried out that allows to ensure wide possibilities for performing analysis of affecting character on fibrous semi-finished product over the whole ring working face of a disc from the input circular edge to the output one.

Authors

V.I. Kovalev, Yu.D. Alashkevich
Siberian State Technological University

Authors job

Siberian State Technological University

Keywords

input parameters, headset, chopper, circumferential edge, grinding surface, cutting edge, tilt angle, rotation angle, crossing angle.

Crossing Angle Determination for Cutting Edge of Straightline Knives in Two-faced Configuration of Blade Milling Machines

 

INDEXED IN: