Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Design Improvement of a Sawmill Machine for Rip Cutting

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

K.P. Rukomojnikov, E.M. Tsarev, S.E. Anisimov, O.N. Cheremushkina

Complete text of the article:

Download article (pdf, 0.5MB )

UDС

674.02

DOI:

10.17238/issn0536-1036.2018.5.161

Abstract

The paper introduces technical and technological solutions for equipment which reduce labor costs for setting the thickness of sawn boards and removing the final products (unedged sawn timber) from the machine. The invention is based on a similar design of band saw machines for rip cutting. The band saw machine of a new design has been manufactured. It is equipped with a sawing mechanism and a sawn off boards removing mechanism mounted on a rotary support column. The rotary support column moves between outfeed tables installed on both sides for loading two logs on them simultaneously. The mechanisms operation is carried out in such a way that when the rotary support column turns and transfers to the working position, one of these mechanisms is placed above both outfeed tables. Outfeed tables are able to move in a vertical plane to adjust the thickness of the sawing boards. Setting the thickness of a new board sawn off from the first log is carried out by lifting the corresponding outfeed table to the required board thickness simultaneously with separation of the board from the second log and the removal the board sawn off from the first log. This combination of operations makes it possible to eliminate the time consumption required to adjust the board thickness since this operation is carried out during the sawing mechanism operation. The increasing of band saw machine productivity is realized due to the time cycle reduction of its operation. The article materials can be recommended for improving the productivity of band saw machine. The use of the proposed rip cutting method and technological equipment for its implementation is possible both at woodworking enterprises and in the cutting area with the use of a mobile type machine with implementation of all operations of technological process.

Authors

K.P. Rukomojnikov, Doctor of Engineering Sciences, Associate Professor
E.M. Tsarev, Doctor of Engineering Sciences, Associate Professor
S.E. Anisimov, Candidate of Engineering Sciences, Associate Professor 
O.N. Cheremushkina, Master Degree Student

Affiliation

Volga State University of Technology, pl. Lenina, 3, Yoshkar-Ola, 424000, Russian Federation; 
e-mail: RukomojnikovKP@volgatech.netCarevEM@volgatech.net,
AnisimovSE@volgatech.netolya.cheremushkina.95@mail.ru

Keywords

band saw machine, sawing, rip cutting, log, board

For citation

Rukomojnikov K.P., Tsarev E.M., Anisimov S.E., Cheremushkina O.N. Design Improvement of a Sawmill Machine for Rip Cutting. Lesnoy Zhurnal [Forestry Journal], 2018, no. 5, pp. 161–167. DOI: 10.17238/issn0536-1036.2018.5.161

References

1. Ayzenberg A.I. Puti povysheniya rentabel’nosti lesopil’nykh predpriyatiy [Ways of Improvement the Efficiency of Sawmills]. Derevoobrabatyvayushchaya promyshlennost’ [Woodworking Industry], 2005, no. 4, pp. 8–10.
2. Anisimov S.E., Tsarev E.M., Purtov V.N., Chulkov R.B., Soboleva Yu.A. Len-tochnopil’nyy stanok dlya prodol’noy raspilovki lesomaterialov. [Band Saw Machine for Rip Cutting]. Application for the Invention 2013120446 (RF), no. 2013120446/13, published 10.11.2014, Bulletin no. 31.
3. Vergeychik Yu.V., Isakov V.G., Kuropatkin A.V. Gorizontal’nyy lentochnopil’nyy stanok [Horizontal Band Saw Machine]. Patent 2181080 (RF). no. 99123894, published 12.11.99, Bulletin no. 10.
4. Volegov V.F., Volegov A.V., Volegova N.V., Ezerskiy N.N. Peredvizhnaya lentochnopil’naya ustanovka [Mobile Band Saw Equipment]. Patent 2273560 (RF), no. 2004128702, published 10.04.2006, Bulletin no. 10.
5. Rukomoynikov K.P., Vinogradov P.N., Kapitonov S.M., Khristoforov A.V. Sposob prodol’noy raspilovki sortimentov i stanok dlya ego osushchestvleniya [Approach to Rip Cutting of Timber Assortments and a Machine for Its Implementation]. Patent 2365490 (RF), no. 2007145513, published 27.08.2009, Bulletin no. 24.
6. Anisimov S.E., Tsarev E.M., Gaynullin R.Kh. Lentochnopil’nyy stanok dlya prodol’noy raspilovki lesomaterialov [Band Saw Machine for Rip Cutting]. Patent 2484949 (RF), no. 2011149835, published 20.06.2013, Bulletin no. 17.
7. Prokof’yev G.F., Dundin N.I. Osnovnyye napravleniya intensifikatsii pererabotki drevesiny na lesopil’nom oborudovanii [Basic Trends in Intensification of Wood Processing on a Sawmill Equipment]. Lesnoy Zhurnal [Forestry Journal], 2004, no. 3. pp. 65–72.
8. Shil’ko V.K. Perspektivy razvitiya lentochnopil’nykh stankov [Future Development of Band Saw Machines]. Derevoobrabatyvayushchaya promyshlennost’ [Woodwork-ing Industry], 2004, no. 5, pp. 6–11.
9. Belzile L., Shediac C. Portable Saw Mill with Bed Adjustments, the United States of America, Pat. no. US 2013/0283992 A1, 2013.
10. Dale P. SelfLocking Adjustable Blade Guide For Band Saw, the United States of America. Pat. no. US 8,261,647 B2, 2012.
11. Douglas L., Elgan, P.O. Multi-Directional Portable Band Sawmill for Lumber and Firewood, the United States of America, Pat. no. 5213002, 1993.
12. Keener F., Dewey A., Vernon Mt. Portable Band Saw Sawmill Apparatus, Unit-ed States of America, Pat. no. 6038954, 1998.
13. Mizutani A., Tsuge K., Matsubara K., Ito A.. Band Saw Having Adjustable Blade Guide: United States, Appl. Publ. Pat. no. US 2012/0055312 A1, 2012.

Received on March 15, 2018


Design Improvement of a Sawmill Machine for Rip Cutting

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png