Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Electrical Energy Rationing of Transport Units in the Woodworking Industry

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

S.P. Ageev

Complete text of the article:

Download article (pdf, 0.8MB )

UDС

621.311

DOI:

10.17238/issn0536-1036.2017.4.130

Abstract

Electrical energy rationing in woodworking enterprises is based in accordance with the de-composition of production into the items and processes by the output types, and individual sectors (units, shops, enterprises). We distinguish operational specific power requirements for items and total specific power requirements for separate industrial processes. The pur-pose of this article is to develop an approach to the operating quota setting of the specific energy consumption for underway operations of the woodworking industry: wood hauling, timber transporting from lumber yards to the shops, and technical operations servicing be-tween separate units. We investigate the energy properties of conveyor electric drives when the power waste and useful power consumption are determined by some loss factors and unit capacity. The analytical dependencies ? the energetic characteristics ? between power consumption, specific energy consumption and conveyor capacity are obtained. This method allows us to express the useful load on the unit through productivity ? an evaluating indica-tor of the results of the unit, site, and shop operation. The presence of energy characteristics helps to consider the issue of specific energy consumption scheduling for each type of tim-ber assortments and the production as a whole. The energy characteristic of power consumption of transport devices is linear; of the specific energy consumption is non-linear. The main technological factors and parameters of equipment and raw materials influencing on the specific energy consumption of conveyors are revealed.

Authors

S.P. Ageev, Doctor of Engineering Sciences, Professor

Affiliation

Saint Petersburg State University of Architecture and Civil Engineering,
2-ya Krasnoarmeyskaya ul., 4, Saint Petersburg, 190005, Russian Federation;
е-mail: doctor.mart11@mail.ru

Keywords

conveyer, performance, energetic characteristic, consumed power, specific ener-gy consumption, electric power waste, underway operation, woodworking industry.

For citation

Ageev S.P. Electrical Energy Rationing of Transport Units in the Woodwork-ing Industry. Lesnoy zhurnal [Forestry journal], 2017, no. 4, pp. 130–148. 10.17238/issn0536-1036.2017.4.130

References

1. Ageev S.P. Energeticheskaya kharakteristika elektroprivoda mekhanizma okorki ro-tornogo okorochnogo stanka [Energy Characteristic of Electric Drive of Barking Mechanism of Rotor Debarking Machine]. Lesnoy zhurnal [Forestry journal], 2007, no. 3, pp. 94–100.
2. Ageev S.P. Energeticheskaya kharakteristika mekhanizma rezaniya lesopil'noy ramy [Energetic Characteristic of Cutting Mechanism of Frame Saw]. Lesnoy zhurnal [For-estry journal], 2009, no. 1, pp. 95–100.
3. Ageev S.P. Energeticheskaya kharakteristika elektroprivoda mekhanizma rezaniya lesopil'noy ramy [Energy Characteristic of Electric Drive for Cutting Mechanism of Saw Frame]. Lesnoy zhurnal [Forestry journal], 2009, no. 2, pp. 96–101.
4. Aleksin M.V., Sinev V.S., Pizhurin P.A., Koperin I.F., Golovkov S.I., Pavlosyuk V.A. Ekonomiya energoresursov v lesnoy i derevoobrabatyvayushchey promyshlennosti [Energy Conservation in the Timber and Woodworking Industry]. Moscow, 1982. 216 p.
5. Zenkov R.L., Ivashkov I.I., Kolobov L.N. Mashiny nepreryvnogo transporta: ucheb. dlya vuzov [Stream-Flow Transportation]. Moscow, 1987. 432 p.
6. Instruktsiya po raschetu proizvodstvennoy moshchnosti lesopil'nogo predpriyatiya [Instruction on the Production Capacity Calculation of the Sawmill]. Arkhangelsk, 1986. 65 p.
7. Rykunin S.N., Pyatkov V.E. Metody sostavleniya i rascheta postavov: ucheb. posobie [Methods of Compilation and Calculation of Sawing Patterns]. Moscow, 2002. 69 p.
8. Silaev A.B., Kozoriz G.F. Pod"emnye i transportnye ustroystva derevoobrabatyvayushchikh predpriyatiy: ucheb. dlya vuzov [Lifting and Transport Devices of Woodworking Enterprises]. Moscow, 1989. 409 p.
9. Spivakovskiy A.O., D'yachkov V.K. Transportiruyushchie mashiny: ucheb. posobie dlya mashinostroit. vuzov [Transporting Machines]. Moscow, 1983. 487 p.
10. Kreisel K., Jochem E. Druckluft rationell erzeugen und nutzen. Fachartikel im Rahmen der Initiative “Energie effizient nutzen ? Schwerpunkt Storm”. Baden-Wurttemberg, Germany, 1996.
11. Matthews M.B., Leber J.F. Neurale Netzwerke: Ein Ubersicht. Bulletin of the Swiss Electronic Society (SEV), 1989, vol. 15, pp. 923?932.
12. Rumelhart D.E., Hinton G.E., Williams R.J. Learning Representations by Back-Propagating Errors. Nature, 1986, vol. 323, pp. 533–536.
13. Tonsing E. Stromsparende Beleuchtungssysteme – mehr Licht fur weniger Kosten. Fachartikel im Rahmen der Initiative “Energie effizient nutzen ? Schwerpunkt Storm”. Baden-Wurttemberg, Germany, 1996.
Received on December 26, 2016

Electrical Energy Rationing of Transport Units in the Woodworking Industry

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png