Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Rationing of Electricity Consumed by a Cutting Machine

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

S.P. Ageev

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

621.311

DOI:

10.17238/issn0536-1036.2016.2.91

Abstract

The limitation of specific power consumption in the woodworking enterprises is being constructed in accordance with the decomposition of the production process: certain operations and processes by type of products and some parts (units, shops, an enterprise in general). Accordingly, there are the operating specific power requirements for individual processes
and total specific power requirements for individual production processes. The aim of the paper was the approach of establishing of the operating rules of specific energy consumption to perform the cutting operations on cutting machines, which are used in the production of sawn timber for longitudinal edging of unsquared boards and slabs. The research of the energetic properties of the electric drive of a cutting machine are conducted in the direction in which the loss and useful energy consumption are determined through some loss rates and performance of the unit. In the study the analytical relationship between power consumption, specific power consumption and productivity of a mechanism of a cutting machine,
known as the energy characteristics, are obtained. The used method allows us to express the net load to the unit through productivity – an indicator, which practically reflects the results of the unit, site, department, etc. Planning of specific energy consumption for each standard size of assortments and production is solved more efficiently with the help of the power characteristics. The energy consumption characteristics of a cutting machine is linear, the nature of the specific energy consumption is non-linear. The basic technological factors and parameters of equipment and raw materials affecting the specific power consumption of the cutting machines are identified.

Authors

S.P. Ageev, Doctor of Engineering Sciences, Associate Professor

Affiliation

Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya
Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation;
е-mail: doctor.mart11@mail.ru

Keywords

cutting machine, productivity, energy characteristic, power consumption, specific energy consumption, electric power losses.

References


1. Ageev S.P. Energeticheskaya kharakteristika elektroprivoda mekhanizma okorki rotornogo okorochnogo stanka [Energy Characteristics of the Device Electrical Drive of Barking of a Cambium-Shear Debarker]. Lesnoy zhurnal, 2007, no. 3, pp. 93–99.
2. Ageev S.P. Energeticheskaya kharakteristika mekhanizma rezaniya lesopil'noy ramy [Energy Characteristic of Cutting Mechanism of Frame Saw]. Lesnoy zhurnal, 2009, no. 1, pp. 95–100.
3. Ageev S.P. Energeticheskaya kharakteristika elektroprivoda mekhanizma rezaniya lesopil'noy ramy [Energy Characteristic of the Electric Drive of the Cutting Mechanism of a Saw Frame]. Lesnoy zhurnal, 2009, no. 2, pp. 96–101.
4. Aleksin M.V., Sinev V.S., Pizhurin P.A., Koperin I.F., Golovkov S.I., Pavlosyuk V.A. Ekonomiya energoresursov v lesnoy i derevoobrabatyvayushchey promyshlennosti [Energy Savings in Forestry and Wood Industry]. Moscow, 1982. 216 p.
5. Gofman I.V. Normirovanie potrebleniya energii i energeticheskie balansy promyshlennykh predpriyatiy [Rationing of Energy Consumption and Energy Balances of Industrial Enterprises]. Moscow, 1966. 319 p.
6. Instruktsiya po raschetu proizvodstvennoy moshchnosti lesopil'nogo predpriyatiya [Instructions on Calculation of Production Capacity of the Sawmill Enterprise]. Arkhangelsk, 1986. 65 p.
7. Lyubchenko V.I. Rezanie drevesiny i drevesnykh materialov [Cutting of Wood and Wood Materials]. Moscow, 1986. 296 p.
8. Rykunin S.N., Pyatkov V.E. Metody sostavleniya i rascheta postavov [Methods of Preparation and Calculation of Supply]. Moscow, 2002. 69 p.
9. Rykunin S.N., Tyukina Yu.P., Shalaev V.S. Tekhnologiya lesopil'noderevoobrabatyvayushchikh proizvodstv [Technology of Sawing and Woodworking Industries]. Moscow, 2007. 225 p.
Received on December 29, 2014

Rationing of Electricity Consumed by a Cutting Machine

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png