![]() Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425
Phone / Fax: (818-2) 21-61-18 Archive |
![]() These works are licensed under a Creative Commons Attribution 4.0 International License. V.N. Glukhikh, A.G. Chernykh Complete text of the article:Download article (pdf, 1MB )UDС674.023DOI:10.37482/0536-1036-2020-5-166-175AbstractIt is known that it is possible to determine the age of a tree and the conditions for its growth by some external features. These features include the number of annual layers on the tree trunk cross section, the correct geometric shape of these layers. The stem taper indicates where this tree grew: in an overstocked stand or in open areas. The oval shape of the cross sections of the trunk is common to the trees with irregular crown or grown inclined to the horizon. A powerful external action of a prevailing wind load influences on the cross sections shaping of tree trunks. Trunk, crown and corresponding cross-breaking strength and compression resistance along the wood fibers of a tree are formed in response to all external influences during its growth. The collaborative effect of these factors is the size, shape and location of the core and sapwood zones in the tree trunks, on which the strength, density, and location of wood defects are dependent, and which affect the quality of wood products in-service. The authors chose the initial stress formed during the tree growth as a uniform criterion for assessing the influence of the natural features of wood on the quality and strength of wooden building structures. The value of which can be fairly estimated by the size and shape of the core and sapwood zones of the tree trunks cross sections. The size and shape of these zones can be measured by scanning. The log sawing pattern should be selected using appropriate computer software that allow obtaining the high-quality sawn timber for the construction purposes. The research purpose is to develop a method for determining the size and shape of the core and sapwood zones of the tree trunk sections that have a natural curvature and grow vertically or with an inclination to the horizon; and what is more, to substantiate the connection between the shape and size of the tree trunk oval sections with the initial stresses developing during growth and the wood strength under tension, compression along the fibers and static bending.AuthorsV.N. Glukhikh, Doctor of Engineering, Prof.; ResearcherID: AAV-9066-2020,ORCID: https://orcid.org/0000-0002-9912-506X A.G. Chernykh, Doctor of Engineering, Prof.; ResearcherID: AAV-4843-2020, ORCID: https://orcid.org/0000-0002-9912-506X AffiliationSaint Petersburg State University of Architecture and Civil Engineering, 2-ya Krasnoarmeyskaya ul., 4, Saint Petersburg, 190005, Russian Federation; e-mail: vnglukhikh@mail.ru, ag1825831@mail.ruKeywordswood ultimate strength, statistical bending, bending moment, timber structures, stress strain behavior, primary stress, core shiftingFor citationGlukhikh V.N., Chernykh A.G. Reasoning of Tree Cross Sections Oval Shaping while Growing with an Inclination. Lesnoy Zhurnal [Russian Forestry Journal], 2020, no. 5, pp. 166–175. DOI: 10.37482/0536-1036-2020-5-166-175References1. Belov S.V. Wind is the Main Factor Determining the Shape of Tree Trunks and Their Stability. Botanicheskii Zhurnal, 1934, vol. 13, no. 3, pp. 3–24.2. Glukhikh V.N., Akopyan A.L. Initial Stresses in Timber: Monograph. Saint Petersburg, SPbGASU Publ., 2016. 118 p. 3. Glukhikh V.N., Okhlopkova A.Yu. Resin Pocket Formation in Tree Stems of Dahurian Larch. Lesnoy Zhurnal [Russian Forestry Journal], 2017, no. 5, pp. 35–52. DOI: 10.17238/issn0536-1036.2017.5.35, URL: http://lesnoizhurnal.ru/upload/iblock/212/Glukhikh2.pdf 4. Glukhikh V.N., Okhlopkova A.Yu. Determination of Bending Moment and Deflection in Lumber Cross-Sections of Dahurian Larch from the Action of Initial Stresses. Lesnoy Zhurnal [Russian Forestry Journal], 2018, no. 1, pp. 89–98. DOI: 10.17238/issn0536-1036.2018.1.89, URL: http://lesnoizhurnal.ru/upload/iblock/051/89_98.pdf 5. Glukhikh V.N., Akopyan A.L., Okhlopkova A.Yu. Natural Features of Wood: Monograph. Saint Petersburg, Polytech Publ., 2018. 392 p. 6. Ivanov L.A. On the Effect of Wind on Tree Growth. Botanicheskii Zhurnal, 1934, vol. 13, no. 3, pp. 37–44. 7. Kuznetsov A.I. Internal Stresses in Timber. Moscow, Goslesbumizdat Publ., 1950. 59 p. 8. Okhlopkova A.Yu. Research of Dahurian Larch Sawmill Warping Cased by of Initial Stresses and its Own Weight. Sistemy. Metody. Tekhnologii. [Systems. Methods. Technologies.], 2018, no. 1, pp. 17–21. DOI: 10.18324/2077-5415-2018-1-105-109 9. Razdorskiy V.F. Principles of the Skeleton Structure of Plants. Priroda, 1934, no. 9, pp. 20–29. 10. Temnov V.G. The Boinic Principle of Regulating the Parameters of the Stress Strain Behavior of Structural Systems during Their Design and Operation. Proceedings of the 53rd Scientific Conference. Saint Petersburg, SPbGASU Publ., 1996, pp. 123–128. 11. Alméras T., Clair B. Critical Review on the Mechanisms of Maturation Stress Generation in Trees. Journal of The Royal Society Interface, 2016, vol. 13, iss. 122, art. 20160550. DOI: 10.1098/rsif.2016.0550 12. Banks C.H. Sawing and Stacking. Timber to Reduce Warp. Timber Technologie, 1966, no. 3, pp. 36–39. 13. Bonnesoeur V., Constant T., Moulia B., Fournier M. Forest Trees Filter Chronic Wind-Signals to Acclimate to High Winds. New Phytologist, 2016, vol. 210, iss. 3, pp. 850–860. DOI: 10.1111/nph.13836 14. Cassens D.L., Serrano J.R. Growth Stress in Hardwood Timber. Proceedings of the 14th Central Hardwoods Forest Conference, Wooster, OH, March 16–19, 2004. Wooster, USDA, 2004, pp. 106–115. 15. Coutand C., Pot G., Badel E. Mechanosensing Is Involved in the Regulation of Autostress Levels in Tension Wood. Trees, 2014, vol. 28, pp. 687–697. DOI: 10.1007/s00468-014-0981-6 16. Fourcaud T., Blaise F., Lac P., Castéra P., de Reffye P. Numerical Modelling of Shape Regulation and Growth Stresses in Trees. Trees, 2003, vol. 17, pp. 31–39. DOI: 10.1007/s00468-002-0203-5 17. Kübler H. Studien über Wachstumsspannungen des Holzes–Erste Mitteilung: Die Ursache der Wachstumsspannungen und die Spannungen quer zur Faserrichtung. Holz als Roh- und Werkstoff [European Journal of Wood and Wood Products], 1959, vol. 17, pp. 1–9. DOI: 10.1007/BF02608827 18. Nicholson J.E. A Rapid Method for Estimating Longitudinal Growth Stresses in Logs. Wood Science and Technology, 1971, vol. 5, iss. 1, pp. 40–48. DOI: 10.1007/BF00363119 19. Okura S., Ozawa K., Takagaki N. On the Twisting Warp of Wood. Part IV. Twisting Warp of Boards in Relation to Fiber Directions. Mokuzai Gakkaishi, 1963, no. 9(4), pp. 121–124. 20. Roignant J., Badel É., Leblanc-Fournier N., Brunel-Michac N., Ruelle J., Moulia B., Decourteix M. Feeling Stretched or Compressed? The Multiple Mechanosensitive Responses of Wood Formation to Bending. Annals of Botany, 2018, vol. 121, iss. 6, pp. 1151–1161. DOI: 10.1093/aob/mcx211 21. Stevens W.C., Mech E. Twist in Sitka Spruce. Timber Trades Journal, 1960, no. 2. Received on September 11, 2019 Reasoning of Tree Cross Sections Oval Shaping while Growing with an Inclination |
Make a Submission
Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024" INDEXED IN:
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
![]() |
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
![](/img/transparent.gif)