Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Simulation of Chipboard Materials Motion in the Cylindrical-Conical Bunkers

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

V.V. Lozovetskiy, A.A. Shadrin, S.A. Katkov 

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

621.039.546:621.039.52.034.3

DOI:

10.17238/issn0536-1036.2018.2.97

Abstract

The paper presents the results of experimental and analytical studies of hogged wood motion in a cylindrical-conical bunker. This material is considered as a granular medium with an effective viscosity depending on the physical and mechanical properties of wood particles (coefficients of internal and external friction). To describe the motion of particles of such a material, the authors have obtained the equations similar to the Navier–Stokes equations, and the boundary conditions necessary for their solution, taking into account the sliding motion of particles on the walls of the bunker. The universal boundary conditions for the vortex and flow functions for particles moving along the vertical and inclined walls of the bunker are proposed. These conditions are based on the use of physical and mechanical properties of hogged wood and its products. This allows analytically describing the movement of gran-ular media in bins with one central discharge port, which significantly reduces the cost of creating systems for transporting similar media in various technological processes. The experiments are carried out on models and real cylindrical-conical bunkers of pneumatic transport systems, taking into account the criteria of similarity theory. This helps us to obtain consistent data characterizing the influence of the angle of inclination of the conical part of the bunker, a diameter of the discharge port and physical and mechanical properties of the medium on the process of gravitational motion of hogged wood and products on its basis. The dependences for calculating the slip velocity of wood particles on walls of the bunker, and changes of speed of particles in the granular medium in the hopper axis, its input and output boundaries are presented. The results of calculations of processes taking place in the bunker of the pneumatic transport system, obtained using the proposed equations of motion and the universal boundary condition for the vortex function, and experimental data are in good agreement. This allows carrying out a comparative analysis of the technical and economic efficiency of various design solutions.

Authors

V.V. Lozovetskiy, Doctor of Engineering Sciences, Professor 
A.A. Shadrin, Doctor of Engineering Sciences, Professor 
S.A. Katkov, Postgraduate Student 

Affiliation

Mytishchi Branch of Bauman Moscow State Technical University, 1-ya Institutskaya ul., 1, Mytishchi, Moscow region, 141005, Russian Federation; e-mail: Lozovetsky@mail.ruShadrin@mgul.ac.ruKatkovSA@ya.ru

Keywords

chipboard material, qasi-Newtonian fluid, coefficients of internal and external friction, ratio of apparent viscosity, flow function, vortex function

For citation

Lozovetskiy V.V., Shadrin A.A., Katkov S.A. Simulation of Chipboard Materials Motion in the Cylindrical-Conical Bunkers. Lesnoy zhurnal [Forestry journal], 2018, no. 2, pp. 97–108. DOI: 10.17238/issn0536-1036.2018.2.97

References

1. Geniev G.A. Voprosy dinamiki sypuchey sredy [Problems of the Dynamics of the Granular Medium]. Moscow, Gosstroyizdat Publ., 1958. 122 p. (In Russ.) 
2. Jenike A.W., Johanson J.R., Carson J.W. Bin Loads. Part 2: Concepts. Transactions of the American Society of Mechanical Engineers. Ser. B: Journal of Engineering for Industry, 1973, vol. 95, iss. 1, pp. 1–5. 
3. Krymasov V.N. Sypuchaya sreda kak model' nen'yutonovskoy zhidkosti [Granular Medium as a Model of Non-Newtonian Fluid]. Voprosy atomnoy nauki i tekhniki. Ser.: Atomno-vodorodnaya energetika i tekhnologiya [Problems of Atomic Science and Technology], 1980, no. 2, pp. 138–141. 
4. Krymasov V.N. Dvizhenie sypuchey sredy kak nen'yutonovskoy zhidkosti: otchet IAE. Inv. № 35/248182 [The Motion of a Granular Medium as a Non-Newtonian Fluid: a Report of the Kurchatov Institute, No. 35/248182]. Moscow, 1982. 
5. Krymasov V.N., Lozovetskiy V.V., Mordvintsev V.M. Raschet dvizheniya sharovykh tvelov v aktivnoy zone VTGR [Calculation of the Motion of Spherical Fuel Elements in the Active Zone of HTGR]. Voprosy atomnoy nauki i tekhniki. Ser.: Atomno-vodorodnaya energetika i tekhnologiya [Problems of Atomic Science and Technology], 1990, no. 2, pp. 44–46.
6. Lozovetskiy V.V., Krymasov V.N. Gidromekhanicheskie i teplovye protsessy v yadernykh reaktorakh s mikrotvel'nym toplivom [Hydro-Mechanical and Thermal Processes in Nuclear Reactors with Micro-Pebble Fuel]. Moscow, All-Russ. Institute of Scientific and Technical Information RAS Publ., 2003. 326–329 p. (In Russ.)
7. Nikolaevskiy V.N. Opredelyayushchie uravneniya plasticheskogo deformirovaniya sypuchikh sred [Defining Equations of Plastic Deformation of the Granular Media]. Prikladnaya matematika i mekhanika [Journal of Applied Mathematics and Mechanics], 1971, vol. 35, no. 6, pp. 1070–1082. 
8. Potter D. Computational Physics. London, Wiley, 1973. 304 p. 
9. Revuzhenko A.F. Mekhanika uprugo-plasticheskikh sred i nestandartnyy analiz
[Mechanics of Elastic-Plastic Media and Non-Standard Analysis]. Novosibirsk, NSU Publ., 2000. 426 p. (In Russ.) 
10. Fikhtengol'ts G.M. Kurs differentsial'nogo i integral'nogo ischisleniya. v 3 t. [The Course of Differential and Integral Calculus. In 3 Vol.]. Moscow, Nauka Publ., 1969. 421 p. (In Russ.) 
11. Bedenig D. Ein theoretisches Model zur Beschreibung des Kugelhaufen-Fliessverhaltens im Core eines Kugelhaufen-Reaktors. Nuclear Engineering and Design,1967, vol. 6, iss. 5, pp. 479‒488.
12. de Josselin de Jong G. The Double Sliding, Free Rotating Model for Granular Assemblies. Geotechnique, 1971, vol. 21, iss. 2, pp. 155–163. 
13. Drucker D.C., Prager W. Soil Mechanics and Plastic Analysis or Limit Design. Quarterly of Applied Mathematics, 1952, vol. 10, iss. 2, pp. 157–165.
14. Goodman M.A., Cowin S.C. A Continuum Theory for Granular Materials. Archive for Rational Mechanics and Analysis, 1972, vol. 44, iss. 4, pp. 249–266. 
15. Hill R. The Mathematical Theory of Plasticity. Oxford, Clarendon Press, 1956. 355 p. 
16. Lilly D.K. On the Computational Stability of Numerical Solutions of Time-Dependent Non-Linear Geophysical Fluid Dynamics Problems. Monthly Weather Review,1965, vol. 93, no. 1, pp. 11–26.

Received on September 24, 2017


Simulation of Chipboard Materials Motion in the Cylindrical-Conical Bunkers

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png