Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Rationing of Electricity Consumed by Saw Frames

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

S.P. Ageev

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

621.311

DOI:

DOI: 10.17238/issn0536-1036.2017.1.154

Abstract

Rationing of specific energy consumption in woodworking enterprises is constructed in ac-cordance with the decomposition of production into the partial operations and processes by types of products and into particular areas (units, shops, enterprises). Due to this fact the operating (by partial operations) and total (by separate manufacturing processes) specific energy consumption standards are distinguished. The purpose of this article is to develop an approach to the energy balance preparation and the establishment of the operating rate of specific energy consumption to perform framed woodsawing operations. Energy properties of the electric drive of saw frames are examined in the direction in which the losses and useful energy consumption are determined by loss factors and the performance of the unit. As a result of research we obtained the analytic dependences between power consumption, specific power consumption and performance of cutting mechanism of saw frames, known as energetic characteristics, and made up the energy balance of a saw frame. The proposed method allows us to express the payload to the unit through the performance – an indicator of evaluation of the working results of the unit, site, shop, etc. The presence of power char-acteristics is a way to the more qualitative approach to the planning of specific energy con-sumption for each standard size of assortments and production. The energetic characteristics of power consumption of saw frames are nonlinear. The basic technological factors and pa-rameters of equipment and raw materials affecting specific power consumption of saw frames are determined.

Authors

S.P. Ageev, Doctor of Engineering Sciences, Associate Professor

Affiliation

Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation;
е-mail: doctor.mart11@mail.ru

Keywords

saw frame, productivity, energetic characteristic, power consumption, energy balance, specific energy consumption, electric loss, operating rate of specific energy consumption.

For citation

Ageev S.P. Rationing of Electricity Consumed by Saw Frames. Lesnoy zhurnal [Forestry journal], 2017, no. 1, pp.154–165. DOI: 10.17238/issn0536-1036.2017.1.154

References


1. Ageev S.P. Energeticheskaya kharakteristika mekhanizma rezaniya lesopil'noy ramy [Energetic Characteristic of Cutting Mechanism of Frame Saw]. Lesnoy zhurnal, 2009, no. 1, pp. 95–100.
2. Ageev S.P. Energeticheskaya kharakteristika elektroprivoda mekhanizma rezaniya lesopil'noy ramy [Energy Characteristic of Electric Drive for Cutting Mechanism of Saw Frame]. Lesnoy zhurnal, 2009, no. 2, pp. 96–101.
3. Aleksin M.V., Sinev V.S., Pizhurin P.A., Koperin I.F., Golovkov S.I., Pavlosyuk V.A. Ekonomiya energoresursov v lesnoy i derevoobrabatyvayushchey promyshlennosti [Energy Savings in the Timber and Woodworking Industry]. Moscow, 1982. 216 p.
4. Vremennaya instruktsiya po normirovaniyu raskhoda teplovoy i elektricheskoy en-ergii v proizvodstve pilomaterialov [Temporary Instructions on the Heat and Electricity Flow Rationing in the Production of Lumber]. Moscow, 1980. 60 р.
5. Gofman I.V. Normirovanie potrebleniya energii i energeticheskie balansy promyshlennykh predpriyatiy [Rationing of Energy Consumption and Energy Balances of Industrial Enterprises]. Moscow, 1966. 319 p.
6. Instruktsiya po raschetu proizvodstvennoy moshchnosti lesopil'nogo predpriyatiya [Instructions on the Calculation of the Sawmill Production Capacity]. Arkhangelsk, 1986. 65 p.
7. Lyubchenko V.I. Rezanie drevesiny i drevesnykh materialov: ucheb. posobie dlya vuzov [Wood and Wood Materials Cutting]. Moscow, 1986. 296 p.
8. Rykunin S.N., Pyatkov V.E. Metody sostavleniya i rascheta postavov: ucheb. posobie [Designing and Calculation Methods of Sawing Patterns]. Moscow, 2002. 69 p.
9. Rykunin S.N., Tyukina Yu.P., Shalaev V.S. Tekhnologiya lesopil'no-derevoobrabatyvayushchikh proizvodstv: ucheb. posobie dlya vuzov [Technology of Wood-working Industries]. Moscow, 2007. 225 p.
10. Kreisel K., Jochem E. Druckluft rationell erzeugen und nutzen. Fachartikel im Rahmen der Initiative “Energie effizient nutzen – Schwerpunkt Storm”. Wirtschaftsministe-rium Baden-Wurttemberg, 1996.
11. Matthews M.B., Leber J.F. Neurale Netzwerke: Ein Ubersicht. Bulletin of the Swiss Electronics Society (SEV), 1989. Bd. 15. Ss. 923–932.
12. Tonsing E. Stromsparende Beleuchtungssysteme – mehr Licht fur weniger Kosten. Fachartikel im Rahmen der Initiative “Energie effizient nutzen – Schwerpunkt Storm”. Wirtschaftsministerium Baden-Wurttemberg, 1996.
13. Rumelhart D.E., Hinton G.E., Williams R.J. Learning Representations by Back-Propagating Errors. Nature, 1986, vol. 323, pp. 533–536.
Received on February 17, 2016

Rationing of Electricity Consumed by Saw Frames

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 

scopus.jpg

DOAJ_logo-colour.png

logotype.png

Логотип.png