Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Numerical Modeling of Long Logs Barking in the Barking Drums

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

O.A. Kunitskaya, А.Е. Lukin, G.N. Kolesnikov, E.A. Tikhonov, T.V. Tyurikova

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

676.023.1

DOI:

10.17238/issn0536-1036.2016.3.135

Abstract

A significant part of wood chips for pulp and paper and wood-based panels production is produced in the Wood Yards of the wood processing enterprises. One of the main operations of the technological process is the pulpwood debarking in the barking drums. The pulpwood length entering a barking drum typically does not exceed 1.2 m. This fact reasonably allows us to neglect its possible lateral bending at processing because of its stiffness. However, recently the foreign Wood Yards began to practice long timber barking. This can signifi-cantly improve the performance of the Wood Yards, reduce energy consumption and the wood losses at the stage of wood debarking. Tapering and bending strain have a significant impact on the quality when debarking of long logs. As the development of the earlier studies we consider barking of long logs and stems in a barking drum, which is significantly shorter than stems. In this context, there is an actual problem of the quality research of debarking of long logs in the shortened drums. The objective of the paper is the application of numerical modeling to assess the impact of long logs bending in accordance with their tapering. A software complex of the finite element analysis ANSYS is used as an instrument of the re-search. As a result of the simulation the adequacy of the proposed modeling techniques is proved. Its use confirms the previously formulated hypothesis that not only the collision, but also the resulting flexural strain and stresses can cause destruction of structures, weaken the adhesive power of bark and wood and laminas.

Authors

O.A. Kunitskaya1, Doctor of Engineering Sciences, Associate Professor А.Е. Lukin1, Postgraduate Student G.N. Kolesnikov2, Doctor of Engineering Sciences, Professor E.A. Tikhonov2, Candidate of Engineering Sciences, Associate Professor T.V. Tyurikova3, Candidate of Engineering Sciences, Senior Lecturer

Affiliation

1Saint Petersburg State Forest Technical University under name of S.M. Kirov, Institutskiy per., 5, Saint Petersburg, 194021, Russian Federation; e-mail: ola.ola07@mail.ru;
lv-fashion@bk.ru
2Petrozavodsk State University, Lenin ave., 33, Petrozavodsk, Republic of Karelia, 185910, Russian Federation; e-mail: 79214519247@ya.ru
3 Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation;
е-mail: t.tyurikova@narfu.ru

Keywords

long timber barking, stem taper, long timber bending, numerical modeling, quali-ty of barking, barking drum.

References


1. Birger I.A., Mavlyutov R.R. Soprotivlenie materialov [Structural Resistance]. Moscow, 1994. 512 p.
2. Vasil'ev A.S. Tekhnicheskie resheniya, zashchishchennye pravookhrannymi dokumentami Rossiyskoy Federatsii v otnoshenii oborudovaniya dlya okorki lesomaterialov [Technical Solutions Protected by the Law Enforcement Documents of the Russian Federa-tion in Respect of the Equipment for Wood Barking]. Inzhenernyy vestnik Dona [Engineer-ing Journal of Don], 2012, no. 2. Available at: ivdon.ru/magazine/archive/n2y2012/831.
3. Vasil'ev A.S. Funktsional'no-tekhnologicheskiy analiz oborudovaniya dlya gruppovoy okorki drevesiny [Functional and Technological Analysis of the Equipment for a Group Barking of Wood]. Inzhenernyy vestnik Dona [Engineering Journal of Don], 2012, no. 3. Available at: ivdon.ru/ru/magazine/archive/n3y2012/909.
4. Gazizov A.M., Grigor'ev I.V., Katsadze V.A., Shapiro V.Ya., Murashkin N.V. Povyshenie effektivnosti mekhanicheskoy okorki lesomaterialov [Improving the Efficiency of the Mechanical Debarking of Wood]. Saint Petersburg, 2009. 240 p.
5. Gazizov A.M., Shapiro V.Ya., Grigor'ev I.V. Variatsionnyy metod rascheta i stabi-lizatsii parametrov rotornoy okorki [Variational Method of Calculation and Stabilization of Rotary Debarking Parameters]. Inzhenernyy zhurnal (s prilozheniem) [An Engineering Jour-nal with Appendix], 2009, no. 7, pp. 47–51.
6. Grigor'ev I.V., Gul'ko A.E. Matematicheskaya model' protsessa okorki lesomateri-alov ostrym indentorom [Mathematical Model of the Wood Debarking Process by a Sharp Indenter]. Derevyannye konstruktsii–2011: obrazovanie, praktika, innovatsii v stranakh Barentseva Evro-Arkticheskogo regiona: sb. nauch. tr. Mezhdunar. nauch.-obrazovat. semi-nara [Wooden Constructions–2011: Education, Practice and Innovations in the Countries of the Barents Euro-Arctic Region: Proc. Int. Sci. and Educational Seminar]. Arkhangelsk, 2012, pp. 62–70.
7. Grigor'ev I.V., Kunitskaya D.E. Umen'shenie kolichestva otkhodov osnovnogo proizvodstva drevesno-podgotovitel'nykh tsekhov za schet avtomatizatsii osnovnykh oper-atsiy [Reducing the Amount of Waste of the Primary Production of the Wood Yards Due to the Basic Operations Automation]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2015, vol. 3, no. 2–2(13–2), pp. 409–412.
8. Grigor'ev I.V., Khitrov E.G., Vlasov Yu.N., Ivanov V.A., Zhdanovich V.I. O ne-obkhodimosti dopolnitel'nykh issledovaniy energoemkosti protsessa poperechnogo pileniya drevesiny [On the Need for More Research in Energy Intensity Process of Wood Cross Cut-ting]. Sistemy. Metody. Tekhnologii [Systems. Methods. Technologies], 2013, no. 4(20), pp. 143–147.
9. Grigor'ev I.V., Khitrov E.G., Ivanov V.A., Zhdanovich V.I., Derbin M.V. Sovmestnoe vliyanie temperatury i vlazhnosti drevesiny sosny na energoemkost' protsessa poperechnogo pileniya [Joint Influence of Temperature and Moisture Content of Pine Wood on the Energy Consumption of the Cross Cutting Process]. Sistemy. Metody. Tekhnologii [Systems. Methods. Technologies], 2014, no. 2(22), pp. 157–162.
10. Grigor'ev I.V., Shapiro V.Ya., Gul'ko A.E. Matematicheskaya model' gruppovoy okorki lesomaterialov v okorochnykh barabanakh [Mathematical Model of Group Debark-ing of Wood in the Barking Drums]. Nauchnoe obozrenie [Scientific Review], 2012, no. 4, pp. 154–171.
11. Kolesnikov G.N., Dospekhova N.A. Zakonomernosti soudareniy i ka-chestvo ochistki balansov neodinakovogo diametra v koroobdirochnom barabane [Collision Com-mon Factors and the Quality of Pulpwood Treatment of an Unequal Diameter in a Barking Drum]. Fundamental'nye issledovaniya [Fundamental Research], 2013, no. 10–15, pp. 3328–3331.
12. Kravchenko T.S., Grigor'eva O.I., Abdulova M.A. Tendentsii rosta drevostoev v Leningradskoy oblasti [The Growth Trends of the Forest Stands in Leningrad Region]. Te-oreticheskie i prikladnye aspekty sovremennoy nauki [Theoretical and Applied Aspects of the Modern Science], 2014, no. 6–1, pp. 165–167.
13. Kunitskaya O.A. Aktual'nye problemy lesozagotovitel'nogo proizvodstva v Ros-sii na rubezhe 2015 g. [Actual Problems of Timber Production in Russia at the Turn of 2015]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2014, vol. 2, no. 5–4(10–4), pp. 183–186.
14. Kunitskaya O.A. Povyshenie ekologicheskoy bezopasnosti lesozagotovitel'nogo proizvodstva za schet effektivnoy pererabotki nizkotovarnoy drevesiny [Increasing of Envi-ronmental Safety of Timber Production by the Efficient Processing of Low-Merchantable Wood]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2015, vol. 3, no. 2–1(13–1), pp. 247–250.
15. Kunitskaya O.A. Perspektivy razvitiya nizhnikh lesopromyshlennykh skladov [Prospects of Development of the Lower Lumber Warehouses]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Research-es of the XXI Century: Theory and Practice], 2015, vol. 3, no. 2–2(13–2), pp. 246–249.
16. Kunitskaya O.A., Grigor'ev I.V. Perspektivy uvelicheniya ob"emov lesoeksplu-atatsii za schet nizkotovarnoy drevesiny [Prospects for Increasing the Volume of Forest Ex-ploitation by Low-Merchantable Wood]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2014, vol. 2, no. 3–2(8–2), pp. 104–107.
17. Kunitskaya O.A., Grigor'ev I.V. Raschet deformatsionnykh svoystv drevesiny [Calculation of the Deformation Properties of Wood]. Voronezhskiy nauchno-tekhnicheskiy vestnik, 2014, no. 4(10), pp. 84–88.
18. Kunitskaya O.A., Grigor'ev I.V. Pererabotka nizkotovarnoy drevesiny: problemy i perspektivy [Processing of Low-Merchantable Wood: Problems and Prospects]. Energiya: ekonomika, tekhnika, ekologiya, 2015, no. 9, pp. 70–75.
19. Kunitskaya O.A., Kolesnikov G.N., Kunitskaya D.E., Lukin A.E. Osobennosti okorki dlinnomernykh sortimentov s uchetom sbega v okorochnykh barabanakh [Debarking Features of Long Logs with Account of Tapering in the Barking Drums]. Inzhenernyy vest-nik Dona [Engineering Journal of Don], 2015, vol. 36, no. 3. Available at: http://www.ivdon.ru/ru/magazine/archive/n3y2015/3184 (accessed 15.01.2016).
20. Kunitskaya O.A., Lokshtanov B.M., Grigor'ev I.V. Izgotovlenie tekhnolog-icheskoy shchepy iz nizkokachestvennoy drevesiny [Industrial Chips Production from Low-Quality Wood]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2014, vol. 2, no. 3–4(8–4), pp. 156–160.
21. Kunitskaya O.A., Lokshtanov B.M., Grigor'ev I.V. Pererabotka niz-kotovarnoy drevesiny na tekhnologicheskuyu shchepu [Processing of Low-Merchantable Wood to In-dustrial Chips]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teoriya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2014, vol. 2, no. 3–2(8–2), pp. 379–382.
22. Kunitskaya O.A., Lokshtanov B.M., Grigor'ev I.V., Kunitskaya D.E., Lukin A.E. Poisk novykh tekhnicheskikh resheniy dlya povysheniya effektivnosti proizvodstva tekhno-logicheskoy shchepy [Finding New Technical Solutions to Improve the Efficiency of the Industrial Chips Production]. Intensifikatsiya formirovaniya i okhrany intellektual'noy sobstvennosti: materialy respublik. nauch.-prakt. konf., posvyashchennoy 75-letiyu PetrGU [Intensification of the Formation and Protection of the Intellectual Property: Proc. Republic Sci. and Practical Conf., Dedicated to the 75th Anniversary of Petrozavodsk State Universi-ty]. Petrozavodsk, 2015, pp. 14–15.
23. Kunitskaya O.A., Lukin A.E. Obosnovanie napravleniya utochneniya ma-tematicheskoy modeli gruppovoy okorki lesomaterialov dlya usloviy okorki dlinnomerov [Justification of the Specification Direction of the Mathematical Model of the Wood Group Debarking for Lofty Timber]. Aktual'nye napravleniya nauchnykh issledovaniy XXI v.: teor-iya i praktika [Actual Directions of Scientific Researches of the XXI Century: Theory and Practice], 2015, vol. 3, no. 2–2(13–2), pp. 430–433.
24. Lokshtanov B.M., Gul'ko A.E., Grigor'ev I.V. Povyshenie effektivnosti podgo-tovki nizkokachestvennoy drevesiny k proizvodstvu tekhnologicheskoy shchepy [Improving the Effectiveness of the Low-Quality Wood Preparing for the Industrial Chips Production]. Prirodnye resursy i ekologiya Dal'nevostochnogo regiona: materialy Mezhdunar. nauch.-prakt. foruma [Natural Resources and Ecology of the Far East Region: Proc. Intern. Sci. and Practical Forum], 2013, pp. 117–121.
25. Shapiro V.Ya., Grigor'ev I.V., Gul'ko A.E. Analiz metodov rascheta parametrov i obosnovanie matematicheskoy modeli razrusheniya kory pri gruppovoy okorke drevesiny [Analysis of Methods of Parameters Calculation and Justification of the Mathematical Mod-el of the Cortex Destruction at the Group Debarking of Wood]. Uchenye zapiski Petroza-vodskogo gosudarstvennogo universiteta. Ser. “Estestvennye i tekhnicheskie nauki” [Pro-ceedings of Petrozavodsk State University. Natural and Engineering Sciences], 2011, no. 8, pp. 92–96.
26. ?ufar K., Zupan?i? M. Les jelke (Abies alba) kot material in tkivo dreves. Zbornik gozdarstva in lesarstva, 2009, no. 89, pp. 55–66. Available at: http://eprints.gozdis.si/165/1/zbgl-89-6.pdf (accessed 15.01.2016).
27. Isokangas A. Analysis and Management of Wood Room. Oulu, 2010. 115 p. Available at: jultika.oulu.fi/Record/isbn978-951-42-6261-6 (accessed 15.12.2014).
Received on February 01, 2015

Numerical Modeling of Long Logs Barking in the Barking Drums

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png