Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Modernization of Harvester Head Delimbing Knife

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

K.P. Rukomoynikov, S.V. Vedernikov

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

634.0.36

DOI:

10.17238/issn0536-1036.2019.1.120

Abstract

In recent decade, the development of the logging industry in the world is defined by a significant increase in the diversity of logging vehicle fleet. The demand for modern highcapacity equipment, which allows increasing of forest processing efficiency, forces scientists and forest vehicles manufacturers to develop new equipment and regularly improve its existing models. Design development of multifunctional harvesting equipment working bodies (harvesters and processors) is of particular interest. The purpose of the proposed delimbing knife modernization is impact reduction from dissipative forces and energy intensity of the process by forehanded moving the knife to the position of cutting limbs off and removing the knife from the tree trunk in their absence. This is achieved due to the fact that delimbing knife movement from angular (nonoperative) position to operative position parallel to tree trunk feed direction occurs after the knife body undergoes an external load from displacement of a pusher located in front of the knife. The pusher is shifted beyond the area of delimbing knife cutting edge under the load from cutting limbs and returned to its original position immediately after cutting. As a result of using the proposed delimbing knife operation method, the knife is moved quickly and in a welltimed manner to operative or nonoperative position. Special attention in realization of the new technical solution was paid to strength and reliability of construction operating under high loads, reducing the sensitivity of the delimbing knife to dirt accumulation and constant impacts. Implementation of the proposed delimbing knife operation for tree trunk pruning will allow to decrease the influence from dissipative forces and energy capacity of the process, and to increase the quality of tree processing at this stage of the technological process.

Authors

K.P. Rukomoynikov, Doctor of Engineering Sciences, Associate Professor
S.V. Vedernikov, Master Degree Student

Affiliation

Volga State University of Technology, pl. Lenina, 3, Yoshkar-Ola, Republic of Mari El, 424000, Russian Federation; е-mail: RukomojnikovKP@volgatech.netVedernikov1995@yandex.ru

Keywords

felling, logging equipment, harvester, delimbing knife, harvester head, dissipative forces

For citation

Rukomoynikov K.P., Vedernikov S.V. Modernization of Harvester Head Delimbing Knife. Lesnoy Zhurnal [Forestry Journal], 2019, no. 1, pp. 120–127. DOI: 10.17238/issn0536-1036.2019.1.120

References

1. Budnik P.V., Demchuk A.V. Funktsional’no-tekhnologicheskiy analiz kharvesternoy golovki [Functional and Technological Analysis of Harvester Head]. Nauka i biznes: puti razvitiya [Science and Business: Ways of Development], 2012, no. 9(15), pp. 36–38.
2. Demchuk A.V. Modernizatsiya tekhnologicheskogo oborudovaniya kharvestera dlya povysheniya effektivnosti vyvozki sortimentov [Modernization of Harvester Technological Equipment for Improving the Assortment Removal Efficiency]. Inzhenernyy Vestnik Dona [Engineering Journal of Don], 2012, no. 2, pp. 542–546.
3. Keskinen J., Kinnunen K., Khanne K. Valochnoye ustroystvo dlya valki i obrezki such’yev na stvolakh derev’yev i lezviye dlya obrezki such’yev [Feller device for felling and limbing on tree trunks and blade for limbing]. Patent RF, no. RU 2 513 415 С2. 2010.
4. Mazurkin P.M. Poiskovoye konstruirovaniye lesotekhnicheskogo oborudovaniya: ucheb. posobiye [Exploratory Research Design of Forestry Equipment: Educational Text-book]. Saransk, Saransk Branch of Saratov University Publ., 1990. 304 p. (In Russ.)
5. Posharnikov F.V., Yudina N.Yu., Bulanov A.S., Ledentsov P.G. Analiz sostoyaniya tekhnicheskogo osnashcheniya lesozagotovitel’noy promyshlennosti [State Analysis of Technological Infrastructure of Logging Industry]. Lesotekhnicheskiy Zhurnal [Forest Engineering Journal], 2012, no. 2, pp. 100–105.
6. Syunev V.S., Seliverstov A.A. Rabochiye organy kharvesterov: proektirovaniye i raschet: ucheb. posobiye [Working Bodies of Harvesters: Engineering and Design: Educa-tional Textbook]. Petrozavodsk, PetrSU Publ., 2005. 204 p. (In Russ.)
7. Eriksson J.A.L. Device in an Apparatus for Processing Trees. Patent US, no. 4,194,542. 1980.
8. Moisio J. Timber Harvester. Patent US, no. 5,732,754. 1998.
9. Niemi P. Delimbing Device and a Method in a Delimbing Device. Patent US, no. US 6,318,425 B1. 2001.
10. Wildey A.J. Tree Harvesting and Processing Head. Patent US, no. 5,785,101. 1998.

Received on November 07, 2018


Modernization of Harvester Head Delimbing Knife

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png