Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Justification of Peripheral Segment Machining Parameters

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

А.А. Fomin,

Complete text of the article:

Download article (pdf, 0.3MB )

UDС

674.059

DOI:

Abstract

Parabolic cutting of logs produces large lumber waste (peripheral segments, laths, etc.) which mainly consist of high quality wood fiber. Therefore, large lumber waste is not appropriate to use for the production of fuel pellets, but rather for direct application pro-ducts: furniture items, products for interior finish of rooms, construction of modern houses, etc. Machining of large lumber waste and further manufacturing of quality wood products will enhance sustainable use of wood, save material and energy resources, stabilize and improve the environmental situation through the conservation of natural forests, crucial for oxygen regeneration. At the same time, large lumber waste in terms of machining is a very low-tech harvesting due to unpredictable shape and size and heterogeneous properties of the material, stochastic arrangement of knots and lack of developed technological bases. This causes serious problems at machining. Such instability makes high machining performance and accurate finished products from lumber waste problematic. The paper aimed to determine the elements of profile cutting of large lumber waste and energy parameters which form the basis for designing equipment and the process of peripheral segment machining. To achieve this aim we have carried out theoretical and experimental researches of lumber waste profile cutting. We have analyzed alternative schemes of blank sliding location, of profile up-cutting and down-cutting, as well as possible additional work rests in the cutting zone. This analysis helped substantiate a scheme of profile cutting of large lumber waste, which was implemented in an actual machine model for large lumber waste machining. The obtained process variables for peripheral segment treatment and cutting power are the background information required to develop quality equipment and profile cutting of peripheral segments.

Authors

А.А. Fomin, Candidate of Engineering, Associate Professor

Vladimir State University
Gorkogo, 87, 600026 Vladimir, Russia
E-mail: fomin1@mail.ru

Affiliation

Vladimir State University

Keywords

peripheral segment, profile cutting, machining, fixed location, cutting power, cutting mode.

References

1. Lyubchenko V.I. Rezanie drevesiny i drevesnykh materialov [Cutting of Wood and Wood Materials]. 3rd ed. Moscow, 2004. 310 p. 2. Fomin A.A., Gusev V.G. Stanok dlya pervichnoy obrabotki gorbylya [Machine for Primary Treatment of Slab]. Patent RF no. 95589. 3. Fomin A.A., Gusev V.G. Sposob pervichnoy obrabotki gorbylya [Method of Primary Treatment of Slab]. Patent RF no. 2443547. 4. Fomin A.A., Gusev V.G. Mekhanicheskaya obrabotka otkhodov drevesiny [Wood Waste Machining]. Izbr. tr. Vseros. konf. po problemam nauki i tekhnologiy [Selected Works of the All-Russian Conference on Science and Technology]. Moscow. 2011. 128 p. 5. Fomin A.A. Oborudovanie i tekhnologiya mekhanicheskoy obrabotki otkhodov lesopileniya [Equipment and Technology of Lumber Waste Machining]. Moscow, 2013. 206 p.

Justification of Peripheral Segment Machining Parameters

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png