Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Experimental and Theoretical Modeling of Power Consumption in Fiberboard Production

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

N.G. Chistova,

Complete text of the article:

Download article (pdf, 0.6MB )

UDС

676.1.054.1

DOI:

Abstract

To reduce power consumption of grinding machines and determine the optimal operating mode in fiberboard production is an issue of great importance. The paper aimed to study specific energy consumption to achieve the required degree of grinding of wood fiber semi-products at given design and process parameters of grinding mills. The studies were conducted on industrial units of the fiberboard plant at the timber industry complex in Lesosibirsk. The experimental research results were processed using the methods developed for mathematical models in order to describe the object of research (specific energy consumption) and find optimal operating conditions for the system under study. We obtained a statistical-mathematical description of the relationship between the grinding degree factors, technological and structural parameters of grinding mills and the specific energy consumption for grinding. We found that the degree of fiber grinding, quality characteristics of boards and power consumption for grinding depend on the same factors and correlate with each other. Based on the data obtained, one can choose the grinding parameters ensuring the best physical and mechanical properties of the board while keeping power consumption for grinding at the lowest possible level both for the wet and dry methods of fiberboard production.

Authors

N.G. Chistova, Doctor of Engineering, Professor

The Ural State Forest Engineering University
Pobedy, 29, 662546, Lesosibirsk, Krasnoyarsk Krai, Russia
Е-mail: chistova_n_g@mail.ru

Affiliation

Lesosibirsk Branch of Siberian State Technological University

Keywords

power, optimization, criteria, grinding degree, wood fiber mass, refiner, defibrator.

References

1. Pizhurin A.A. Modelirovanie i optimizatsiya protsessov derevoobrabotki [Modeling and Optimization of Woodworking]. Moscow, 2004. 375 p. 2. Chistova N.G., Petrusheva N.A., Alashkevich Yu.D. Issledovanie vozmozhnosti primeneniya vtorichnogo volokna v proizvodstve DVP mokrym sposobom [Study of the Possible Use of Recycled Fiber in Wet Method Fiberboard Production]. Novosibirsk, 2009. 136 p. 3. Chistova N.G. Pererabotka drevesnykh otkhodov v tekhnologicheskom protsesse polucheniya drevesnovoloknistykh plit: dis. … dokt. tekhn. nauk [Recycling of Waste Wood in Fiberboard Production: Dr. Tech. Sci. Diss.]. Krasnoyarsk, 2010. 415 p. 4. Chistova N.G. Energozatraty razmol'nogo uchastka v proizvodstve DVP [Power Consumption of Grinding Section in Fiber Board Production]. Lesnoy zhurnal, 2010, no. 1, pp. 125–129.

Experimental and Theoretical Modeling of Power Consumption in Fiberboard Production

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png